My Zibra LP2824 Plus flashing red and green lights, how can i fix this problem as i'm in a remote place and don't have technical service for it?

It could be faulty PCB, buy a new one, It's not worth fixing.

Green light red

I've a Zebra LP2824 printer , It gives me the Green-Red error .. And the manual guide told me that's a problem with flash programming .. What can I do to solve it ??

I would re-calibrate the printer and see if that helps, usually the quickest and correct means to fix ya !
Calibrate Zebra Desktop Printer

Download the user manual to your TV. It will have all details about how to reset it to factory default. A factory default set should be done now. To download its user manual, click here.

Hi there James
it seems to me like you have the yellow light of death, but don't worry this is something that can be fixed.
You have two options here
Option1 you can send the console to SONY for $150, they will send you a refurbished model oh and all data may be lost. The whole process usually takes about 4-6 weeks.
Option 2You can fix the problem at home with a PS3 repair guide worth only $40 a 3rd of the cost of sony, the ps3 will be fixed within the next hour or 2.
Hope this helps

here is step by step trouble shooting
1) attempt to turn on the ps3
+you will see one of 4 things a green yellow red light
+flashing red light
+green light
+no lights
2) if you see a green yellow red light call sony your system will need service
3) if you see a red flashing light also call sony needs service
4) if the light is green turn off the system and one the light is back to red press and hold the power button for a series of 2 beeps (do not forget the one when you first push the button down) then let go (it might be a video issue)
5) if you still see no video and a green light check the cable you are using and try again on a different tv
6) if you see no power light call sony it needs service


these are genuine trouble shooting steps from sony technical support if you do have to call them be prepared to follow the same steps that lead up to service. thank you

Find "SMART Board Tools" or "SMART Board Tools 2011" on your computer. Select Control Panel > About Software and Product Support > Tools > Diagnostics. From the menu select Service and then Start.
If the red light does not change to green, try the following steps located located here: http://preview.tinyurl.com/3qggntc
Ian Berg

Technical Support Specialist

SMART Technologies
http://www.smarttech.com/tcea

flashing red for zebra lp2824plus

Does the light flash red, or does it turn off completely?
If it flashes red, you've got an overheating problem. You either need to send it in to Sony, or a third party repair place.

If it turns off completely, you need a new power supply which you can attempt to repair yourself (they cost $30-$40 online) or again, send it in.

Sony charges about $150 USD plus shipping, third party repair places would most like charge $80-$100

With Sony though you usually don't get your system back, they send you a refurbished one (so all your data will be gone).

Usually these fixes don't last (from Sony either). Best bet is to just get someone backup the hard drive data and get your disc out, then buy a new system.

TV STARTS UP AND GOES BLANK SOUND NO PICTURE