SOURCE: I have a circuit breaker
After turning off breaker,pull all your plugs and light switches along with the lights, one at a time, looking for loose or broken wires, bad switches or plugs. Not that it could be causing your problem but you may have one or more GFI units in the loop that should be looked at. Most modern wiring layouts have GFI and often use separate circuits and breakers some times different wire sizes for lights and plugs. 15 amp for lights and sometimes 20 amp for plugs depending on usage.. May be wise to have a licensed electrician look at the problem if you exhaust the listed possibilities or do not feel comfortable with any of the procedures. Above all make sure the power is off by testing the wires at each position you are working at. Take care and good luck!
SOURCE: MY WIFE HIT HER SHOULDER
I hope she is alright. Did the switch break into pieces? or she just struck it, maybe moved it a little in place? If you are confiden t enough to remove the switch, do so in order to verify whether or not a wire was jared loose.. Good Luck and be safe, be careful. switch wiring ciukd be HOT Electrically. _Ned
395 views
Usually answered in minutes!
×