I have a keurig 2.0. I removed the packing disk, but after I turn it on I get the message"to remove it. I can not get past this message

To properly identify a model for which you don't have the carton or manual, remove the water reservoir and its lid, and set these aside. Remove any pod if present from the pack holder. Carefully turn the unit over and look for lightly engraved text on the underside of the base. It will read, in capital letters, something like "KEURIG SINGLE CUP BREWING SYSTEM, COFFEE MAKER MODEL K45."

This video link below, from keurig, should get you back running.
remove reservoir, if you have a water filter, remove it and set aside. Use a damp non abrasive cloth and clean tank including filter screen. DO NOT DRY the inside with a cloth as lint may remain. DO NOT PUT in a dishwasher. Let it air dry. Reinsert the water filter. Put tank back into unit making sure it is aligned properly. Fill tank all the way up with clean water. Turn power on and attempt 3 WATER only brew cycles at the 6 or 8 ounce size. DO NOT USE A PORTION PACK.

If this doesn't work, you may have to clean the needles of the K-cup holder and / or the filter screen and water reservoir port.

If the problem persists you can contact you can contact Keurig at 1-866-901-BREW (2739) or Keurig.com

http://www.keurig.com/what-if-brewer-indicates-prime?cm_mmc=Google-_-Dynamic%20Search-_-Keurig-_-Keurig%20Homepage

Hi, Give it a few good slaps on the back...it needs to be burped..

Here is a tip that I wrote that will give you some things to try that will helpyou get your Keurig coffee brewer workingagain.

Keurig CoffeeBrewer not making a full cup of Coffee
heatman101

> hardware problem or software or keyboard?

Experiment #1: turn the computer off. Connect a USB keyboard. Turn the computer on. Use that keyboard to try the 'TAB' key (to move from field-to-field). If TAB works, then try using the SPACE or ENTER keys.

Experiment #2: turn the computer off. Turn the computer on, and look for the message:

PRESS <blah> to ENTER BIOS SETUP

When you see the message, press the <blah> key. On the BIOS SETUP menus, try the ENTER key to "select" a field, to prove that the ENTER key works fine.

Experiment #3: Turn the computer off. Disconnect the AC power. Remove the battery.
Remove the disk-drive. Take the original CD/DVD disk, and start to install Windows to the disk-drive. As you work through the installation screens, you'll need to press ENTER at least once,
if only to acknowledge that installation cannot proceed, because the disk-drive is not connected.
If the ENTER key works, it works.

Experiment #4: Like #3, but connect a different, empty, disk-drive, and reinstall Windows.
If it completes, then your "original" setup has a SOFTWARE problem.

Hi,

Here is a tip that I wrote that will give you some things to try that will helpyou get your Keurig coffee brewer workingagain.

Keurig CoffeeBrewer not making a full cup of Coffee
heatman101

';
';][\\][

Update your OS to XP service Pack 3 from microsoft.
If your operating system do not have any service Pack(SP) ie minimum SP2 yet, your M/S office 2007 will not function.

Do your Operating system meets the below requirement?

Microsoft Office Basic 2007 requirement:-
CPU: 500 megahertz (MHz) processor or higher

RAM: 256 megabyte (MB) RAM or higher1

HDD: 1.5 gigabyte (GB); a portion of this disk space will be freed after installation if the original download package is removed from the hard drive.

Drive: CD-ROM or DVD drive

Display: *1024x768 or higher resolution monitor

OS: Microsoft Windows XP with *Service Pack (SP) 2, Windows Server 2003 with SP1, or later operating system

*Internet Explorer 6.0 or later, 32 bit browser only. Internet functionality requires Internet access (fees may apply).

the files are write protectected not the disk use another disk or delete the files

I have had this error before. Check your floppy and CD/DVD drives to see if there is a disk in them. If so remove and restart with your drives empty. This has helped me in the past.

These instructions should help.

Toshiba® Satellite 100, 105, 110, 115, 200, 205, 210, 400, 405, 410, 420, 430 Series

Hard Drive Installation Instructions

1. Turn notebook upside-down.
2. Remove the battery compartment cover.
3. Remove the battery pack.
4. Remove the 2 Phillips screws that mount the hard drive down.
5. Slide the hard drive away from its connector and gently lift it out of the notebook.
6. Remove the tray from the old hard drive and assemble it onto the new hard drive.
7. Slide the new hard drive into its connector inside the notebook.
8. Replace the 2 Phillips screws used to mount the hard drive into place.
9. Replace the battery pack.
10. Replace the battery compartment cover.

Before shipping back, there is one routine to try:

1. Turn off. Remove battery pack and internal disk battery (right side, under coin-slot cap)
2. Move main power dial, clicking into each mode on the dial, 3 seconds each. (this discharges residual charge).
3. Twist off lens; make sure pins and contact points aren't blocked. If needed, wipe gently w/soft cloth.
4. Re-attach and reinstall batteries.
5. Cross fingers

If this doesn't fix it, the repair center will have to.