Set radio stations

mercury

POST A SYMPTOM FIRST
NO RADIO TOLD OF THE 8 OFFERED DAY1 NEW, OR UPGRADED TO AFTERMARKET ENDLESS KINDS OF RADIOS
IF OEM RADIO 1 TO 8
SOME HAVE RADIO CODE (A LICENSE, OWNER SHIP CODE)
SEEM NO RADIO LOCKS ARE HERE (OEM)
SO THE ONLY RESET IS PULLING FUSE OR THE CAR BATTERY
THE GLOVE BOX GUIDE (LOST) TELLS YOU WHAT TO DO IN THAT ACT.

USERS GUIDE 203 (FREE)
If the battery has been disconnected or a new battery has been installed,
the clock and radio settings must be reset once the battery is
reconnected.

NO PROBLEM TOLD
GOT A USED RADIO OFF EBAY
OR STOCK RADIO DIED, EVEN THE DISPLAY DEAD.
OR ONLY SOUND DEAD OR ONLY 1 SPEAKER
RDS FAILING
STORED STATION PRESETS GET LOST???????
CD OR TAPE FAILING? ONLY (PREMIUM HAS IT)
DEAD STATIONS AM OR FM?
OR OR OR
THE RADIO CHAPTERS HERE IS HUGE, EVEN A CD CHANGER

There is 2 different radios. With or without rds. Here are the instructions for both.
Setting the Time for Radios with Radio Data Systems (RDS) To set the hour, press the clock button. The clock symbol displays and the hour flashes. Turn the ADJ (adjust) knob to increase or to decrease the hours. To set the minutes, press the clock button again. The minutes. Turn the ADJ knob to increase or to decrease the minutes. The time can be set with the ignition on or off.
To synchronize the time with an FM station broadcasting Radio Data System (RDS) information, press and hold the clock button to enter the clock set mode, then press and hold the clock button for three seconds until UPDATED displays. If the time is not available from the station, NO UPDATE displays.
RDS time is broadcast once a minute. After tuning to an RDS broadcast station, it can take a few minutes for the time to update.
Setting the Time for Radios without Radio Data Systems (RDS) To set the hour, press the clock button. The clock symbol displays and the hour flashes. Turn the ADJ (adjust) knob to increase or to decrease the hours. To set the minutes, press the clock button again. The minutes flash. Turn the ADJ knob to increase or to decrease the minutes. The time can be set with the ignition on or off.

Without Radio Data Systems (RDS): To set the hour, press the clock button. The clock symbol will appear on the display and the hour number will flash. Then turn the ADJ knob to increase or todecrease. To set the minutes, press the clock button again. The minute numbers will flash. Then turn the ADJ knob to increase or to decrease. The time can be set with the ignition on or off.
With RDS: Same as without RDS unless you want to Sync. with a radio station. To synchronize the time with an FM station broadcasting Radio Data System (RDS) information, press and hold the clock button to enter the clock set mode, then press and hold the clock button for three seconds until UPDATED appears on the display. If the time is not available from the station, NO UPDATE will appear on the display. RDS time is broadcast once a minute. After tuning to an RDS broadcast station, it may take a few minutes for the time to update

To set the hour, press the CLOCK button. The clock symbol displays and the hour flashes. Turn the ADJ (adjust) knob to increase or to decrease the hours. To set the minutes, press the CLOCK button again. The minutes flash. Turn the ADJ knob to increase or to decrease the minutes. The time can be set with the ignition on or off.
To synchronize the time with an FM station broadcasting Radio Data System (RDS) information, press and hold the clock button to enter the clock set mode, then press and hold the clock button for three seconds until UPDATED displays. If the time is not available from the station, NO UPDATE displays.
RDS time is broadcast once a minute. After tuning to an RDS broadcast station, it can take a few minutes for the time to update.

Station Pre Set:
You can save 4 pre sets on this radio (1-4) tune the radio to the station you want to save then PUSH and HOLD one of the pre set butons until the sound returns, the station is saved to that pre set. Repeat for the 3 presets.

Clock:
Hour: Push and hold the CLK button and at the same time push the SEEK button to adjust. < decrease hours > increase hours.
Minute: Push and hold the CLK button and at the same time push the TUNE button the adjust. < decrease minutes > increase minutes.

assuming this is the digital clock, you hit the clock button on the dash, followed by the reset button followed by the clock button. at this point, you should be able to hit the clock button to advance numbers, and the reset button to change the numbers you are setting. if its the analog clock, pull on the knob and turn it

setting stations on Fords are easy,put it on the station you want to program and push the channel button in and hold for about 2 seconds then it should flash,now the channel is set..now for the clock,with the key on and radio turned off,press the clock button,then press the seek or scan forward or reverse to adjust the time,then hit the clock button again to make sure it sets.

Does your radio stations also reset at start-up or sometimes do they reset? If you battery is weak and it takes a lot of power to start your vehicle it could reset your clock and sometimes clear your radio stations as well.

Try the following:

Note the radio anti-theft code & station settings;
BE SURE YOU KNOW HOW TO RESET THE ALARM;
Be willing to reset the clock;
clear the MIL code, then:
remove the negative battery cable for one minute during which time, to clear any capacitor stored elctricity, then re-attach the battery cable and reset the alarm, radio settings and clock.

If that does not solve the problem, replace the fuel injector control module.

You have a blown fuse for the memory for the radio & the clock.