I don't know how to activate my camera on my msi wind notebook

None of these appears to have a webcam driver. Support For U160MX

Please download and install the camera firmware from the following link.( http://drivers.softpedia.com/get/FIRMWARE/Msi/MSI-Wind-U135DX-Netbook-Camera-Firmware-0308.shtml ).Your valuable feedback would be appreciated.Thanks for choosing Fixya.

TinuAlbinAlex.

think you need to reinstall driver for that camera to get icon again

if ur using win Xp open my computer u wuld see usb camera just below the dvd rom icon clik on it to activate the camera u can use it to take pics.

you can activate that msi wind u 100 webcam when it is being installed on your system. You will be needing a driver installation source in order to use the device. the reason why you need these drivers, its because it allows the device to be recognized by the operating system .

you can download drivers for free at the manufacturers website.. :)

Hope this will help you out..
Pm me with your operating system and the model of your webcam if you want me to download the drivers for you..

Thank you :)

make sure you can detect networks

If by mistake you disabled the wireless, you can re-activate it by pressing fn-f11

Good luck

please chek ur webcam status..that on or off. if off press fn + f6.

Press the blue "Fn" button on the lower left hand side. Then as your holding that button down...press "F6". There should be a small webcam icon on this button. This worked for me so I hope this helped!

have you tried :
1) Fn key ( Hold that down , it is located at the bottom left of your keyboard)
2) while holding that down hit f9 to turn it on

It gives you a confusing message when its not turned on and a lot of people think that its a driver issue :)

From User manual you can download from HERE:

1) activate your WLAN :
Press and hold the Fn button, and then press the F11 button
repeatedly to enable or disable the Wireless LAN or Bluetooth function recurrently.
2) Check if "Wireless LAN LED indicator glows green when Wireless LAN function is enabled."
3 ) Use Windows to configure your Wlan.
Let me know if you need more help.