How to clean Braun Coffee Grinder Burr Grinder 4045 KMM20

Check out a couple of these sites..

https://duckduckgo.com/?q=+fix+the+hopper+on+my+Braun+4045+coffee+grinder&t=ffab&atb=v159-1&ia=web&iai=https%3A%2F%2Fwww.youtube.com%2Fwatch%3Fv%3DXgg_HqPIPzY&pn=1

google the answer. it is on google search.

depends if ur DIY (do it yourself)type or u know someone who are..or last solution is to order from factory..

You can first try cleaning the burrs, but they are most likely worn and will need to be replaced.
Here is the number for Braun 1-800-816-0810

www.theessentials.com

In particular:
www.theessentials.com/jump.jsp?itemType=PRODUCT&itemID=399

You need both the knob and the spring clamp ring.

Rotate the bean hopper counter clockwise until it stops. Lift it off. Remove the outer burr with the 2 wings and clean under the burr. Clean the opening going to the chute for ground coffee(inside where the burr was).
Install the outer burr. Install the bean hopper. Rotate the bean hopper to the French press grind (coarsest) and operate the grinder. This will clean the burrs and the passages. If it starts to clog, repeat the last part to clean the burrs and passage. It must be grinding to go to a finer setting, but you can go to a coarser setting any time. Another thing. Turn the grinder upside down (empty) and rotate the bean hopper back and forth to clean the threads of the adjusting burr..

I dug in and found your manual at Braun. Take this link and select the second choice to print your 9 page manual. Let me know if further assistance is needed.

http://www.service.braun.com/product/search.asp?rg=NA&c=US&l=GB&typ=ui&frmTyp=s&sgrp=s&grp=HH01%3C%7C%3E&s=kmm30&subgrp=0

Hi there

the following should be the link to your manual

http://www.service.braun.com/line/HH/H3045/H3045_1_MN.pdf

Best wishe

There is a link to them on the Braun website. Here's a link to the English version:

http://www.service.braun.com/line/HH/H3045/H3045_2_NA.pdf

same problem here