Question about Solis Maestro Electric Burr Grinder

1 Answer

Oily beans seem to have clogged our coffee grinder up. What can we do?

Posted by rhodarichard on

Ad

1 Answer

bansheracer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,089 Answers

Rotate the bean hopper counter clockwise until it stops. Lift it off. Remove the outer burr with the 2 wings and clean under the burr. Clean the opening going to the chute for ground coffee(inside where the burr was).
Install the outer burr. Install the bean hopper. Rotate the bean hopper to the French press grind (coarsest) and operate the grinder. This will clean the burrs and the passages. If it starts to clog, repeat the last part to clean the burrs and passage. It must be grinding to go to a finer setting, but you can go to a coarser setting any time. Another thing. Turn the grinder upside down (empty) and rotate the bean hopper back and forth to clean the threads of the adjusting burr..

Posted on Dec 20, 2009

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Our Saeco Vienna Superautomatica sounds like it's grinding beans but keeps running until the red 'bean' light comes on and we have to shut the machine off. Any suggestions?


The grinder is timing out and stops if the beans do not enter the grinder. This happens because:
1- The grinder outlet is clogged and fresh beans cannot pass through the burrs.
2- The grind setting is too fine and helping clogging in the grinding chamber or the ground coffee outlet.
3- Operator may have been using dark roast oily beans. Like it or not, the dark roast oily beans do not make stronger espresso. Please stop using such beans in fully automatic espresso machines.
4- The grinder has already made over 2000 grinds and the burrs are blunted and not grinding beans as needed.
To solve this malfunction, clean the grinder. Make sure the grinder outlet to the doser is cleaned. This outlet passage is about 2 inches or more. To clean it, lay the machine on its back (water tank side) to allow better view of cleaning the doser and the passage of coffee from the grinder to the doser. Use the link below to find instructions for cleaning the grinder and replace the burrs.
Gaggia Titanium and Plus Espresso machines parts and repairs Saeco...

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/edward_bbd2c7ff4ee1828a

Oct 18, 2014 | Coffee Makers & Espresso Machines

1 Answer

Talea ring the grinder will not stop gringing


The Talea model is with a Ceramic grinder system. This can happen when the grinder outlet is clogged with coffee grounds. Fresh beans cannot enter the grinder as the outlet is clogged. Remember, the grinder in any machine is a grinder. It does not shovel the coffee grounds out and clean the outlet when it is clogged.
1- Check if the grind setting is too fine (powder like). If so change the setting to coarse. Fully automatic machines do not need fine grind. Keep the grind fineness like the table slat grain.
2- Check if the beans are dark roast and oily. Oily beans are a slow poison for any fully automatic machine. Change the beans to Non oily medium roast type.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/edward_bbd2c7ff4ee1828a

Oct 16, 2014 | Saeco Talea Ring Plus Espresso Machine

2 Answers

Why does no brewed coffee comes out? bypass preground does work


- coffee-channel is stuck.

check google for calibrating/cleaning your gaggia.

Aug 27, 2014 | Gaggia Titanium Espresso Machine

1 Answer

How to fix a bodum bistro electric coffee grinder that doesn't grind well


This can be caused by several things;
If it used to be good but is now faulty it is most likely that it just needs cleaning. If you are using beans that are 'oily' they can clog the grinder, you should anyway disassemble it and clean every year. Do not use soap and water, just brush it with a stiff brush (e.g. the stiffest type of toothbrush) and a vacuum cleaner.
There is also a possibility that something has got into the grinder along with the coffee beans that has damaged the grinding wheels; in that case you need to replace the wheels.

Jul 29, 2014 | Bodum Bistro Electric Burr Grinder for...

1 Answer

I use an oily bean with my Gaggia Brera which has the integrated grinder on it. I know this may eventually clog up the grinder; and so, is there a way to clean the grinder without taking it apart? Is...


Oily beans means the coffee is old and/or over roasted. I reccomend using fresher beans. i recommend buying less coffee more often. i usually use a paper towel and wipe out the "hopper" where the beans sit.. hope that helps

Mar 07, 2011 | Gaggia Expresso Machine

2 Answers

Grinder gets clogged after several uses


You should clean it with a brush After every use.

Feb 14, 2011 | Salton Coffee Makers & Espresso Machines

1 Answer

Grinders do not always work and seem as if they are worn


The titanium doesn't like oily beans. Best results with fresh roasted beans that don't have an oily shine to them.

The workaround when beans won't go through the grinder - have a wooden coffee stirring stick (or a chopstick etc) and stir the beans in the hopper so they get down into the grinder.

Sep 27, 2010 | Gaggia Titanium Espresso Machine

2 Answers

Beans are too oily


This fixes almost all the "beans will not feed or beans will not grind" problems caused by coffee bean dust packed in the burrs. Oily beans cause this problem more fequently.
a. Pour all the beans out the top.
b. Open the settings up all the way and see what else can be poured out. Use your shop vacuum to **** grounds out the spout and backward out the bean bin.
c. Pour in some instant rice and start grinding. Reduce the grind to a small setting like six and then open the settings all the way again. (The grinder will not start at a low setting with the rice in it. If you let it stop, open the settings to about 16 before trying to restart.)
d. Pour out the rice and vacuum out the ground rice.
e. Adjust the grinder to your favorite setting and try a coffee grind. Grind until most of the rice dust is expelled (any remaining trace of rice dust will not affect the flavor of the coffee).

Aug 06, 2009 | Bosch Benvenuto B30 Espresso/Coffee Maker

3 Answers

Saeco Italia SUP021 YR - Red light #29 on solid


Not clear on "Empty bean container/full grounds drawer) - not empty/not full. " But I gather that coffee is not being dispensed. Most Likely the grinder needs cleaning + brew group needs cleaning ( filter ). Do you get water/steam?

Jun 10, 2008 | Starbucks Saeco Italia Digital Barista...

1 Answer

Saeco easy...


Your grinder needs cleaning- are you using oily beans and/or storing beans in refrig/freezer? Both are a problem for grinder. Also, grinder should not be set to "fine"- it will definitely cause clogging and the situation you point out.. After celaning grinder, will need to re-set it.

Jan 26, 2008 | Saeco Royal Professional Espresso Machine

Not finding what you are looking for?
Solis Maestro Electric Burr Grinder Logo

1,965 people viewed this question

Ask a Question

Usually answered in minutes!

Top Solis Coffee Makers & Espresso Machines Experts

graybeard32301

Level 3 Expert

382 Answers

Ekse

Level 3 Expert

13434 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Are you a Solis Coffee Maker and Espresso Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...