Beko eco washing machine

The WD40 should not have done any harm, unfortunately the faults with the door lock cannon be fixed with CRC, You will need to replace the door lock assembly and hopefully the machine will resume normal operation.

Cheap to buy but expensive to repair.
This may help if you have a motor with carbon brushes
have BEKO Eco WMB 81445LW washing machine It appears

Did you allready pull de powerplug and waited a couple of minutes before you put the plug back in? Maybe this will reset the problem. But if the problem is more severe than a glitch in the proces of the computer.....

My favorite site is Repairclinic.com, if you can't get your answer by Googling your unit.

Hi if your beko wma10w washing machine wont drain or has a spin problem then you have to check the carbon brushes first.

Also check all waste pipes are clear and inspect the pump I have included this video below.

At our website I am doing self diagnostic videos on these beko's as we speak so all tutorials will be in this link below
How to replace Beko Washing Machine Motor Carbon Brushes
you might find this test video helpful but only do it if you have checked the motor

Sounds like could be motor/ or motor brushes....Check belt 1st

sounds like the drain pump blocked or something is stuck in it stopping it from working, i took mine out, cleaned it and it works fine now

eko eco care wma10w is making loud noise when on full spin, have looked at belt seems to be fine

CLICK HERE

http://www.miaudioaddiction.com/fixya/manual.pdf

Please download asap - as it is stored on my personal FTP site, and will be removed in 48 hours.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question





Head over to the manufacturer's website.

Typically they have a SUPPORT section - where you enter the FULL model number, and then can download a FREE manual.



Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question!!!!!!!!