How do u sync the new rock candy wireless controller to your wii

It sounds like you are having trouble getting your Rock Candy controller to sync with your device. Here are a few troubleshooting steps you can try to resolve the issue:

1. Make sure that the controller is charged. If the controller's battery is low, it may not be able to sync with your device.
2. Reset the controller. To reset the controller, hold down the sync button (located on the top of the controller) for about 5 seconds, until the lights flash. Then, release the button and try syncing the controller again.
3. Check that your device is compatible with the Rock Candy controller. The controller is compatible with most devices that use Bluetooth technology, but it may not be compatible with all devices.
4. Make sure that the controller is within range of the device you are trying to sync it with. The controller should be within a few feet of the device to establish a connection.
5. If you are using a wireless adapter to connect the controller to your device, make sure that the adapter is properly connected and working.

https://support.pdp.com/hc/en-us/articles/218228038-My-wireless-Rock-Candy-Controller-will-not-turn-on-with-new-batteries-How-can-I-fix-this-

Have you tried the red buttons on the wii and controller? The red wii sync button is in the door by the sd card slot and the red sync button for the controller is behind the battery cover above the battery's. Push the red sync button on the wii and then the controller. That should sync them.

Forgive me, as I am not 100% certain on this one. Generally speaking, these are housed in the battery compartment. I do not own one, but they are licensed by Nintendo so you can almost guarantee they are relatively the same place as an original.

Have you tried a temporary sync?

If you don't know how to do this then all you gotta do is:

* With a Wii remote that is already synced Press the Home Button.
* Pick Wii remote settings, located at the bottom.
* Select Reconnect.
* Press 1 & 2 on the Rock Candy remote and see if that works.

Sadly this only lasts till the Wii is turned off.

I don't know if it works for the Rock Candy remote, but I hope it does until a more permanent solution turns up for you.

After installing batteries in the controller and inserting the usb stick into your PS3, hold down the home button (the round middle most button with a house on it) for a few seconds until the light on the controller illuminates. This is your indicator your controller is paired with your PS3 and should be assignable and usable at this point.

I just got the pink wireless wii controller by rock candy and i cant figure out to sync it. it comes with a usb drive. do i need to connect it or just plug in the usb drive and be done?

Well, connect the guitar to ps3 via usb.. Then press the sync button.. hope that helps :)

look on the instruments for a red button. press this button at the same time you press the red button on the front of your wii console. this should sync the system to the controllers. (the guitar should already be synced since you plug the wii remote into it, but do it anyway)

You have to manually sync the instruments. While playing press the PS button go to settings, accesory settings and assign each controller individually a number from 1-4.