Normal
0
Double click on this site
http://www.labtec.com/index.cfm/service/listing/EUR/EN,crid=68,crid2=1764
to down load Labtec Camera Drivers.
Then
Disconnectthe Camera from the USB port and
reinstall the CD or
Downloaded softwareprogram. When the program
asks you to connect the
camera to theUSB port, do so and
it should work.
Then to use it on the Web, do this.
Web Camera’s have to besetup on the program they are to be used with.
Just installing the cameraon your
computer does not set it up to broadcast on
messengers or Skype.
Each program has Options that have to be setup in order forthe Audio and Video
to function properly.
A. Skype Setup:
After downloading and installing
Skype (
http://www.skype.com/intl/en-gb/download/skype/windows/beta/downloading/)
set it up as follows:
- Go to Tools, then Options,
and click on Audio Settings and set the Microphone and Speakers
to the computer Audio Card.
- Then click on the Video
Settings.
- The camera if Installed
Properly will come up and show a video picture.
- Then, on the bottom of the
page click on Save.
The camera and audio should function properly. Yourfriends
and
Family will now be able to see and her to
you.
B. Yahoo Setup:
After downloading and installing
Yahoo Messenger (
http://www.soft32.com/download_30.html)
set it up as follows:
- Go to Messenger at the top
left and click on it.
- Next go down to Preferences
and click on it.
- Next Calling and Devices on
the right and set the Microphone and Speakers to the computer Audio Card.
- Next go to the Test Audio
section and (in blue writing) click on “Open the call setup assistant” and follow the
instructions on the left window.
Hopethis helps. Bud
Expert
