Intimitant Fault I have a Flymow HT450 Hedge Trimmer that has stopped working, but intimitantly works now and again. I have checked the cables for continuity and everything seems fine but without a manual I am stuck. Can you help?

The most likely cause would be worn brushes on the motor. Rattling is not a good sign :>)

Check whether there is a fuse in the mains plug, this may have blown.

Me too - I rewired the cable into the junction inside the unit and after reassembly it stopped working. I've narrowed it down to the internal switch(es). There's a black and a red alongside one another. When pressed together - no power. When only the red is pressed - power. But the orange, external handle press engages them both at the same time and I can't see how to avoid this after it's back together
Thanks, Matt

Check the black and white power wires to the motor. You will have to open the trimmer casing. I have 2, 18 inch B&D hedge trimmers and both of them stopped working due to wires coming loose at the motor. I re-soldered the wires to the motor and both trimmers work fine.

i want to attach reversing sensors to my kia sportage 2005

Carburetor high speed adjustment ( screw nearest the filter ) open ( counterclockwise ) 1/2 turn.
Adjust again as needed to run when hot.
make sure the gas mixture ratio is as required.
Henry

Purchased a new hedge trimmer - Thank you for your help

Hi, My Competence B1180-4 digital clock keeps switiching itself off and then back on. This means that the timer etc dosen't work. It is intimitant.

# Keep all people and animals away from the area you're working in # Hold the hedge trimmer correctly using both hands # Make sure the hedge trimmer's switched off and idle before attempting to remove any jammed cuttings # Wear protective clothing including heavy-duty footwear and safety goggles to protect your eyes from flying cuttings # Electric hedge trimmers: Don't use in wet weather. Keep the cable well away from where you are cutting and check that the socket outlet has working RCD protection # Read the manufacturer's instructions before use