How can i adjust settings for blurred pictures on Samsung ES15

Is it a 3D TV. Try changing the refresh rate in the Picture Menu 60HZ is normally the standard but try others. Or if you're TV has Auto Motion Plus options you try turn it on it can be found in your television's menu under Picture Options. The Auto Motion Plus menu contains several options, including On, Off, Clear, Smooth and Standard. If changing your Auto Motion Plus options doesn't correct blur, call Samsung.

You don't need any software.


The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.


Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or, despite what I said first, you can use any photo cataloging program such as Picasa.

this is either a slow shutter speed because of lack of light and you didn't have the flash turned on or a dirty lens can cause it.. if there is anything in focus it is just it grabbed the wrong thing ti focus on and the bad thing would be a bad lens... one of these is whats up

For the ES15 also known as Samsung SL30 in the USA... DOWNLOAD Driver HERE

Good luck (remember to rate this answer).

Dear All,
I have juts purchased PS50C430 and I am not satisfied with the picture quality .The picture is blurred and not as clear as we saw it in the shop. I have a Spider Satellite receiver which is doing an excellent job with my old 29" TV. In addition to blur ,I have to adjust the Plasma whenever I change the satellite channel with different results.
Is there a recommended satellite receiver that matches PS50C430 or any will do. Your help is appreciated.

You have problem with convergence. Have you tried adjusting in the users menu. This is a common problem in this type of TV, usually two convergence amp need to be replaced and sometimes sets of resistors are also to be changed.

There are 2 things you try. go into menu to picture setup scroll down to sharpness,back this setting all the off. If this doesn't do it, go to back of the set on right hand side, if you can see focus slot adjust it slightly.

If it's a projection tv, setting the convergence is normal and necessary sometimes. Go to the menu setup. You should find an option in there for setting the convergence. It's basically just lining up the cross-hairs (+) of all 3 colors so the picture is not so blurry. Just make sure you set all of them that you see on the screen. They all should be sitting on top of each other. Hope this helped you.

Try to reset your camera.

Press Menu.
Go to Set Up.
Go to Reset.
Select Yes.
Press Menu.

Your TV requires Geomatirc Adjustments in proper manner by qualified servcie person.