I need a ceiling mount for the P42... Series. This

Some are avalible with a mounting bracket for on the wall

I have a 52" A.C. Ceiling Fan, M52 Series, Fan 82F4, 120V, 60 Hz 1.0A, File No# E143948, TR/HD: 0596, Serial No# 026351-027900, and have had the fan stored for awhile now and it seems I've misplaced/lost, the mounting bracket that fits inside the cover where the stem and ball are located and mounts to the bracket box inside the ceiling. Any ideas of where I can find one so that I don't have to purchase an entire new ceiling fan (again). I've tried 2 ACE Hardware stores, Home Depot and Lowes and no one carries them.

Look for 2 to 3 screws at the top edge of the fan's ceiling cowl. Remove those and the ceiling cowl can be sled down, which will expose the the ceiling mounting bracket . They are fairly small head screws, so look carefully for them.

Hope this helped you and thanks for choosing FixYa.

betancurf - If you're missing that many parts, you're also going to need the mount for the ceiling receptacle box, and hopefully that receptacle box will support the fan while it's running.
The screws for the fan blades can be found at most home centers that sell ceiling fans. As can all the other mounting parts you'll need to properly install it.

There are a whole bunch of zip codes for Germany depending on where in Germany you're sending a letter to. Here's a url to help you find the one you need.

http://www.mapsofworld.com/germany/germany-useful-informations/germany-codes/germany-zip-code.html

In the main menu, go to Settings, select System, and uncheck Ceiling (that setting is to allow it to be mounted upside down from a ceiling mount).

Hi,
There should be a couple of small screws at the very top on the side of the canopy...you will need to loosen these a few turns and then turn the canopy and drop it down...

This link will help you they had the same problem as you...

http://www.askmehelpdesk.com/electrical-lighting/hampton-bay-ceiling-fan-removal-25673.html

heatman101

Hi, At the fan you'll have a black wire, blue wire, green wire and white wire.
In the ceiling you'll have a black wire, a white wire, and a bare copper wire. If you are using the same wall switch to turn on all of the power to the fan AND the light, connect as follows:
White at ceiling to white from fan
Black at ceiling to black and blue together from fan.
Bare copper wire at ceiling to green wire from fan.

When connected like this, the main power is from the switch, and the fan and light may be set by the pull switches on the fan.
Best regards, --W/D-- Please feel free to rate this solution... thanx!

Did you purchase a new Ducted Ceiling Unit with the Upper Unit air conditioner? If you are replacing an older mach 3, the ducted ceiling packs are not compatible and you will need to purchase the ceiling pack as well. The ducted ceiling pack part number for the 8333 series Mach III AC is below.

1. Heat/Cool Air Distribution Box - 8330B735
2. Cool only ADB - 8330A733
3. Wall Thermostat (if needed) - 7330G3351

Hope this helps.

Visit lyon lighting, they helped me source a replacement part for my westinghouse/encon fan.