The settings on my camera screen are all mixed up; malfunctioning

I have the same problem and I strong suspect the circuit board is going bad. No matter what lens I use, distance from subject, etc. makes any difference. Unfortunately, the fix is about $200.00 - and having to invest $200.00 per year to keep it going is not a viable option for anyone.

You need to configure the setting of the pictures, by removing it from blur to either sharp, soft or something else, click on the menu button of your camera to start the settings. The problem is as result of the settings you give your camera.

number 1,make sure you have lithium batteries,energizer prefered.2 put it on auto focus.3dont be too close on the object your trying to photograph,and 4 do not zoom in too close on object either.this should solve your problem,good luck,hope i helped

If your camera has a sport or action mode that would be your best option if your pics keep coming out blurry. These modes are made for action shots. Its worth a try!

I'm currently having the same problem. :[

You might want to check and make sure your lens in on the "A" setting and not "M". This can be found on the side of your lens.

Try it with DIS function on.
You take a shot, in average daylight conditions in 11 modes, See which settings give good pictures and use those settings.
Probably the best setting for the digital camera is AUTO(green),for a novice

Try resetting camera. If that doesn't work more than likely there is a lens error. 800-706-2534 and keep choosing option 2 and they will tell you where to send it.

Sounds like the auto focus mechanism in the camera needs to be cleaned and adjusted. The camera can be repaired yourself but it takes a great deal of mechanical know how and knowledge. Several links have already been posted on this issue.

I recommend you take the camera to a repair shop and have it done correctly.

Ritz LIED. What u can try doing is resetting the camera.

Press menu
go to setup tab
go up one to reset
press right arrow, highlight reset
press set button in middle of arrows.

Also make sure you are only pressing shutter button half way down and allow time to focus before pressing rest of way down. Can also try changing focus mode from spot to multi. I believe that is under the rec tab in the menu. I think it is called AF AREA. Can't remember for sure.

Try that. If it doesn't work then you will have to send it into casio.

For becca 123.
Try taking pic again.
Usually it will just be something has moved.