Question about Tiger Electronics VCamNow Flash Media Camcorder

1 Answer

I need to find out which one is the set and menu key.

Posted by on

  • Howard Tolbe Mar 22, 2009

    can not plaqyback recorded video

  • Howard Tolbe Mar 22, 2009

    no idea of how to operate Tiger vcamnow 2.0 driver camera

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hi, im not sure if its the same for all vcamnow 2.0 cameras but the set is the top big button(the one you press to record or take videos) an the menu is the one under the button that has the camera/video picture on it(middle button, third row) there ya go now go have some fun using your camera!!

Posted on Mar 07, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I change the resolution on a Panasonic Luminex DMC-ZS20


Press the MENU/SET button. Use the cursor keys to select the REC menu and press MENU/SET. Use the cursor keys to select Picture Size and press MENU/SET. Use the cursor keys to select the desired size and press MENU/SET.

If you need a manual, you may download a copy here.

Jul 05, 2012 | Cameras

6 Answers

On my Brother MFC410CN Printer Message reads Unable to clean I have followed TroubleShooting instrctions and it still appears


MFC620CN/425CN/420CN/410CN/215C/210C and FAX2440C
Press the Menu/Set, Black Start, Menu/Set, and Black Start keys in this order.TIP: For the FAX models equipped with numerical keypads, you may press the Menu/Set, Black Start, and 0 keys instead in the same way as conventional models.Then "MAINTENANCE 10" appears on the LCD. Press 82 using the numerical keys/arrows.
Then press the Menu/Set key.
Error code will display indicating source of error if it is 41 thats print head error,
replace machine.

press stop to exit if needed.
(http://www.fixya.com/support/t250171-brother_mfc_215c_unable_clean)

Oct 06, 2008 | Televison & Video

1 Answer

How do I change the resolution on a DMC-ZS20


Press the MENU/SET button. Use the cursor keys to select the REC menu and press MENU/SET. Use the cursor keys to select Picture Size and press MENU/SET. Use the cursor keys to select the desired size and press MENU/SET.

If you need a manual, you may download a copy here.

Jul 05, 2012 | Cameras

1 Answer

Brother FAX-8070P memory shows full and does not send all pages at one time?


This message means the memory capacity of the unit has been exceeded. The amount of memory used depends on the amount or type of data on the documents being faxed or copied.
  1. If you get an "Out of Memory" message while scanning the first page of a fax, press Stop/Exit to cancel scanning.
  2. If you get an "Out of Memory" message while scanning a subsequent page, you can either press Fax Start to transmit the pages that were scanned so far or press Stop/Exit to cancel the operation.

When Fax Storage is set to On, a copy of all received faxes are stored in the memory, thus using up a % of the memory available for other functions.
The Fax Storage feature is utilized for Fax Forwarding, Fax Paging and Remote Retrieval. If you do not need these features, verify Fax Storage is set to Off by doing the following:
  1. Press the Menu/Set key.
  2. Press the arrow key until FAX appears on the LCD. Then, press Menu/Set.
  3. Press the arrow key until REMOTE FAX OPT appears and then press Menu/Set.
  4. Pressthe arrow key until FAX STORAGE and then press Menu/Set.
  5. Check the setting. The display will read ON or OFF. If the setting is ON, press the arrow key until the display reads OFF.
  6. Press Menu/Set.
  7. If you have faxes stored in the memory, you will receive a message that reads Erase all fax? 1. Yes 2. No. If you want to erase all the faxes in the memory without printing them out, press 1 (Yes) and then press Stop/Exit.
Note
    If you would like to reprint the saved faxes, press 2 (No), press Stop/Exit and continue to the following steps for instructions on how to print stored faxes.
If you do need the features that require Fax Storage to be On, the stored faxes will need to be erased or printed to remove them from the memory and to allow additional memory to be available. Follow these steps to print the stored faxes:
  1. Press the Menu/Set key.
  2. Press the arrow key until FAX appears on the LCD and press Menu/Set.
  3. Press the arrow key until REMOTE FAX OPT appears and then press Menu/Set.
  4. Press the arrow key until PRINT FAX or PRINT DOCUMENT appears and press Menu/Set.
  5. Press Fax Start.
  6. After printing is finished, press Stop/Exit.

Jun 06, 2011 | Brother FAX-8070P Plain Paper Laser

1 Answer

How to get on internet with pspgo?


Go to the Main Menu of your PSP.
Go to Settings.
Scroll down to Network Settings and Press the X button.
Select Infrastructure Mode.
Select New Connection.
Name the connection so that you know it is for web browsing. (ex. WebConnect)
That way you can use another connection for the rest of your online games.
Push the Right Direction Key to go to the next menu.
Select the Scan option and let it pick up your WLAN settings.
Once it picks up a connect, Push the Right Direction Key to go to the next menu.
Select Custom for the Address Settings.
Push the Right Direction Key to go to the next menu.
Leave IP Address Setting on Automatic.
Push the Right Direction Key to go to the next menu.
Select Manual for your DNS Setting.
Push the Right Direction Key to go to the next menu.
Enter in 67.171.70.72 as your Primary DNS and just leave the Secondary DNS blank.
Push the Right Direction Key to go to the next menu.
Select "Do Not Use" for your Proxy Server settings.
Push the Right Direction Key to go to the next menu.
Push the Right Direction Key to go to the next menu.
Push the X button to save your settings.
Do a quick test of the connection to make sure it's working correctly.
Launch Wipeout Pure and go to the Download option in the main menu.
Select the name of the new connection you just made (ex. WebConnect), connect, and enjoy browsing the internet on your PSP.

HOPE THIS WORKDS =P"Im a kid but Ill solve your question!"

Oct 05, 2009 | Sony PlayStation Portable (PSP) Console

1 Answer

Hello, I have characters printing trouble, so that I would like to restore the factory default settings for my printer Tally 2280. But I do not know the procedure to do so. I need Helps, very...


You can reset the menu on the 2280 to factory default settings, but I would strongly recomend first printing a menu print to ensure you know how the menu is currently set up.

The menu can be printed in the follwoing way;

Switch the printer power on.
Press the Setup key to enter the menu settings.
Press the key under "Menu",
Then press the key under "Print" and your current configuration will be printed.

If the menu is locked power the printer on holding down the setup button, this will unlock the menu.

To restore the factory defaults within the printer,
switch the printer off.
Press all four keys beneath the printer display and switch on the printer.
Keep the keys pressed until "Initializing" is seen in the printer display.
Your printer is now set to the factory default configuration.

Jan 27, 2009 | TallyGenicom 2280 Matrix Printer

1 Answer

Print in light


1. Check TONER SAVE setting. If this setting is programmed "ON", all
printed documents will be light.

a. Press MENU/SET, 1 (General Setup), then 6 (Toner Save).

b. Press the top or bottom navigation key (keys located above and below
the MENU/SET key) until the display reads "Toner Save: OFF".

c. Press MENU/SET.

d. Press STOP/EXIT.

2. Check the PRINT DENSITY setting. This setting allows you to adjust
the print density from light to dark.

a. Press MENU/SET, 2 (Fax), 1 (Setup Receive), then 6 (Print Density).

b. Press the up navigation key (key above MENU/SET) to make print
darkeror the down navigation key (key below MENU/SET) to make print
lighter.

c. Press MENU/SET.

d. Press STOP/EXIT.

Oct 15, 2008 | Brother IntelliFAX 2800 Laser Fax

1 Answer

AOSS


you need a wireless connection. And so after that, you go to the internet icon,and then you just type in your link.

1. Go to the Main Menu of your PSP.

2. Go to Settings.

3. Scroll down to Network Settings and Press the X button.

4. Select Infrastructure Mode.

5. Select New Connection.

6. Name the connection so that you know it is for web browsing. (ex. WebConnect)
That way you can use another connection for the rest of your online games.

7. Push the Right Direction Key to go to the next menu.

8. Select the Scan option and let it pick up your WLAN settings.

9. Once it picks up a connect, Push the Right Direction Key to go to the next menu.

10. Select Custom for the Address Settings.

11. Push the Right Direction Key to go to the next menu.

12. Leave IP Address Setting on Automatic.

13. Push the Right Direction Key to go to the next menu.

14. Select Manual for your DNS Setting.

15. Push the Right Direction Key to go to the next menu.

16. Enter in 67.171.70.72 as your Primary DNS and just leave the Secondary DNS blank.

17. Push the Right Direction Key to go to the next menu.

18. Select "Do Not Use" for your Proxy Server settings.

19. Push the Right Direction Key to go to the next menu.

20. Push the Right Direction Key to go to the next menu.

21. Push the X button to save your settings.

22. Do a quick test of the connection to make sure it's working correctly. first you need to have a wireless internet at home. next you need to turn on the wlan on your psp, located at the left side corner of your psp. search for a wlan around you. if its not secured, your lucky, you can connect anytime, but if it has a wep key, you need to find out the key to be able to connect. Switch the wlan button (located on the left side) to on and if don't aoss router seperate from the psp you cannot use automatic. So goto new connection and press scan. Follow on screen instructions.
If you do have an aoss router press button on the aoss router inself so the psp can find it.



Okay now that ive given you your answer make sure to follow fixya's system. Instead of taking the answer and running.


THANK YOU,
NATE

Jun 17, 2008 | Sony PlayStation Portable (PSP) Console

1 Answer

I need help


you are doing it in the wrong menu. you are setting up a connection to location free player

you need a wireless connection. And so after that, you go to the internet icon,and then you just type in your link.

1. Go to the Main Menu of your PSP.

2. Go to Settings.

3. Scroll down to Network Settings and Press the X button.

4. Select Infrastructure Mode.

5. Select New Connection.

6. Name the connection so that you know it is for web browsing. (ex. WebConnect)
That way you can use another connection for the rest of your online games.

7. Push the Right Direction Key to go to the next menu.

8. Select the Scan option and let it pick up your WLAN settings.

9. Once it picks up a connect, Push the Right Direction Key to go to the next menu.

10. Select Custom for the Address Settings.

11. Push the Right Direction Key to go to the next menu.

12. Leave IP Address Setting on Automatic.

13. Push the Right Direction Key to go to the next menu.

14. Select Manual for your DNS Setting.

15. Push the Right Direction Key to go to the next menu.

16. Enter in 67.171.70.72 as your Primary DNS and just leave the Secondary DNS blank.

17. Push the Right Direction Key to go to the next menu.

18. Select "Do Not Use" for your Proxy Server settings.

19. Push the Right Direction Key to go to the next menu.

20. Push the Right Direction Key to go to the next menu.

21. Push the X button to save your settings.

22. Do a quick test of the connection to make sure it's working correctly. first you need to have a wireless internet at home. next you need to turn on the wlan on your psp, located at the left side corner of your psp. search for a wlan around you. if its not secured, your lucky, you can connect anytime, but if it has a wep key, you need to find out the key to be able to connect. Switch the wlan button (located on the left side) to on and if don't aoss router seperate from the psp you cannot use automatic. So goto new connection and press scan. Follow on screen instructions.
If you do have an aoss router press button on the aoss router inself so the psp can find it.



I hope now that ive taken the time to answer your question. You will take the time to appropriately use Fixya's rating system since the question and rating system go hand in hand.


THANK YOU,
NATE

Jun 17, 2008 | Sony PlayStation Portable (PSP) Console

1 Answer

Pebl U6 I have a menu at the left of my screen but can't figure out how to remove it. The phone seems to have limited funtions. I owned one before this one and didn't have this problem, would...


show/hide menu icons
Show or hide menu feature icons in the home screen:
menu > Settings > Personalize > Home Screen > Home Keys > Icons > Show or Hide.
change menu icons & home keys
Change menu feature icons, soft key labels, and smart key function in the home screen:
Menu > Settings > Personalize > Home Screen > Home Keys.

external display
Set external display orientation:
Menu > Settings > Initial Setup > External Display > Left Orientation or Right Orientation.
language Set menu language:
Menu > Settings > Initial Setup > Language scroll Set the highlight bar to stop or wrap around in menu lists:
Menu > Settings > Initial Setup > Scroll.
ringer IDs Activate ringer IDs assigned to phonebook entries and categories:
Menu > Settings > Ring Styles > style Detail > Ringer IDs
ring volume a > Settings > Ring Styles > style Detail > Ring Volume.
keypad volume
Menu > Settings > Ring Styles > style Detail > Key Volume.

Mar 30, 2008 | Lands Phones

Not finding what you are looking for?
Tiger Electronics VCamNow Flash Media Camcorder Logo

Related Topics:

89 people viewed this question

Ask a Question

Usually answered in minutes!

Top Tiger Electronics Video Cameras Experts

kakima

Level 3 Expert

102366 Answers

yadayada
yadayada

Level 3 Expert

70387 Answers

The Knight
The Knight

Level 3 Expert

72670 Answers

Are you a Tiger Electronics Video Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...