Can't log in ..

Are you saying you are now locked out of your router, or the wireless security setting will not change? When you press the reset button are you holding it in for about 10 seconds? If so it should go back to factory settings and a local ip address of 192.168.1.1, to log into the router there should be no username and admin as the password if it went back to factory settings. Have you upgraded the bios on this router? I would start there first, this could be a bug in the software.

Go to Control Panel>Large Icon View>Sound>Playback Tab>Right Click The Headset Icon>Properties>Advanced Tab>Change the Default format from CD quality to DVD quality and voila. :D

http://tango.net/r/.com

No one likes the idea of losing control of personal information such as that which is on your Facebook account. Unfortunately, if you are not careful you can lose control of your account to a hacker or a virus. Your account may be disabled, or you might not be able to log in with your password. There are several ways that things can go wrong, and the Facebook team addresses all of them.

1. Account Compromised and Disabled
   • If someone else is using your Facebook account for illicit activities such as sending spam or abusive messages, Facebook will disable it if the activities have been detected. If this is the case, your account has been compromised. To address this problem, fill out the "My Personal Profile Was Disabled" form, at http://www.facebook.com/help/contact.php?show_form=disabled. The Facebook team will work with you to restore your account to you.
     
   Account Disabled but Not Compromised
   • Everyone who registers as a Facebook user agrees with Facebook's Statement of Rights and Responsibilities. If you violate this agreement, Facebook can disable your account permanently. If your account has not been compromised but you believe it was disabled by mistake, fill out the "My Personal Profile Was Disabled" form (http://www.facebook.com/help/contact.php?show_form=disabled). The Facebook team will review your case and restore your account if you did not violate policy.
     
   Temporary Suspension
   • Sometimes Facebook temporarily disables accounts that are engaged in suspicious behavior. If this is the case with your account, you will receive a message indicating this when you try to log in. Follow the on-screen instructions to regain access to your account.
     
   Account Compromised and Log in Changed
   • If someone has taken over your account and changed your password so you cannot access it, Facebook will help you take back control. Report the compromised account and work with Facebook to verify your identity to get it back.
     

I hope you find it very helpful. Best regards.

Try spraying white vinegar on it and all around it, ANYwhere that water can settle. Water carries dissolved minerals such as calcium and magnesium. As it dries, it leaves a build up of these minerals, that in turn, form a hard, crusty covering that can cause a lot of various issues. The acetic acid in the vinegar will safely dissolve most of the deposits, making it easier to move. :) P.B.

It is most likely the capacitor has shorted or the rectifier has shorted. Check with ohmeter, but make sure it is discharged first by shorting the capacitor with a wire.

1) Examine the “System” and “Application” logs in Event Viewer for other recent errors that might give further clues. To do this, launch > Eventvwr.msc from a Run box; or open “Administrative Tools” in the Control Panel then launch Event Viewer.

2) If you’ve recently added new hardware, remove it and retest.

3) Run hardware diagnostics supplied by the manufacturer.

4) Make sure device drivers and system BIOS are up-to-date.

5) However, if you’ve installed new drivers just before the problem appeared, try rolling them back to the older ones.
6) Open the box and make sure all hardware is correctly installed, well seated, and solidly connected.

7)Confirm that all of your hardware is on the Hardware Compatibility List.

8)Check for viruses.

9)Investigate recently added software.

10)Examine (and try disabling) BIOS memory options such as caching or shadowing.

disable the sound in control panel/hardware and sound/device manager right click the sound card and disable.. veriface should now work just fine.. this is a bug and hopefully lenovo will fix it soon.. this works for everyone, i have the s10e, version 4wg..

I ve had the same issue today and freaked out thinking the phone was crasing. How ever after spending 3 hours trying every thing and aking on the web.

when you double tap the screen it normaly zooms?? yes

use 3 fingure tips to do a double tap!

this will take a sort off large zoom screen lock off and bring the main screen fuctions back inline for you.

please let me know or leave a reply

:0

You have a fuser problem, but sometimes it is just a false reading.

Try this:

press clearmodes, 1, 0, 7, and press and hold clear/stop, until the screen changes. Select 1, for copy SP. Select 7 for Data log. Scroll down to 7807. This will be SC/Jam counter reset.
Select it, and execute. Exit all the way back out. Turn machine off and back on.