A912-mk2 protect mode

If the set screw has been remove try rocking handle back and forth while pulling in it
https://www.homedepot.com/catalog/pdfimages/21/21fea4c4-1155-4df8-a912-73d0b2113e6b.pdf

Vauxhall Agila fuse box:

Fuse box Vauxhall Agila mk1 (from July 2006)
http://www.autogenius.info/en/vauxhall-agila-mk1-fuse-box/

Fuse box Vauxhall Agila mk2 (fom January 2008)
http://www.autogenius.info/en/vauxhall-agila-mk2-january-2008-edition-fuse-box/

Fuse box Vauxhall Agila mk2 (2010)
http://www.autogenius.info/en/vauxhall-agila-mk2-fuse-box/

Fuse box Vauxhall Agila mk2 (from May 2012)
http://www.autogenius.info/en/vauxhall-agila-mk2-may-2012-edition-fuse-box/

Here is a link for the owners manual
http://www.radiomanual.info/schemi/CB/CB_SuperStar_2400_user.pdf

Have you tried to put the exposure mode to "manual"? If you leave it in automatic exposure mode, the iso, speed and aperture will always combine themselves to give the correct exposure and therefore will not let you overexpose your video. Hope this will help.

If the protect function works and causes hindrance to trouble shoot, cancel the protection function as described below, and it will be possible to enter the self-diagnostic function mode. (The protection functions other than the excess current dtect function will be disabled.)

While pressing the "Tone Control" and "Info" keys, press the "Power" key to turn on the power and keep pressing those 2 keys for 3 seconds longer.

The seld-diagnostic function mode is activated with the protection functions disabled.

In this mode, the "Sleep" segment of the Flourescent Display flashes to indicate that the mode is self-diagnostic function mode with the protection functions disabled.

Caution!!!! Usiong this product with the protection function disabled may cause further damage to your unit, so use special care when using this mode.

More than likely the contact pad (aka Membrane pad) is probably damaged... or the flat cable which connects to the main processor, might be loose, or damaged.

You'll need to get this professionally checked out by a qualified technician. It's not an easy fix.

- OPTiC
Master Tech
Digital Analog Therapy
Pioneer Repair : Pioneer Parts

if just bought take it bak and get another on may be a manufacturing problem.

go to the help and support section of your laptop, and type in protect mode. This should pop up a list of options for you to take it out of protect mode.

is it the m1 active mk2???if so try changing the fuse in the power supply..i know my ones the light started to flash on one,i switch it off with a fan on it for 20 mins and it works again..so i just leave it on now.

hi there, little picture means a power supply problem so as the standby mode. yoou may have a defective diode, capacitor, or regulator, do some test, check up power supply section first. ty