Es 02 espresso maker replacement parts top gasket seal

SOURCE: Steam leak in GB Mia Espresso Coffee maker

I had the same trouble before and probable causes were:
too much coffee powder in the funnel?
or
the coffee beans are ground
too much, makes the power clogging in the bottom of the steam tube?

SOURCE: Alessi coban rs04 espresso maker

Hi All,
I had the same problem. There is ONE authorised dealer for Alessi in Italy. They are Arthur Eugster Italia srl, in Asti (Piemonte). I don't have the contact number, but my friend in Italy got a complete set of seals from them, FREE OF CHARGE (don't ask me how he got it) and sent to me in Australia. Good luck

Fulvio

SOURCE: Where to buy replacement gasket

go to www.vev-vigano.com or www.fantes.com

SOURCE: General question about the Mr. Coffee Espresso ECM10

http://safemanuals.com/user-guide-instructions-owner-manual/MR%20COFFEE/ECM10

SOURCE: breville espresso machine 800 ES

I have the same problem. It appears to be caused by a worn steam wand gasket that's inside the steam wand assembly which can be unscrewed from the Breville machine. This was confirmed by the folks at Breville. They referred me to www.thegourmetdepotco.com. That website does not sell the steam wand gasket separately. They sell "Frother Assembly MOdel #800ESXL-250" for $14.95. With tax ($1.42) and shipping via USPS ($5.65), the total is $22.02. A very high price for the failure of a simple plastic washer, but it beats buying a new machine!

Greg