Question about Nintendo Wii Fit for Wii

1 Answer

Doesnt recognise that you have stepped off the board

When we start up the wii fit it just keeps saying please step off me and press A . but noone is on it. we have tried powering it all off and on again but still the same. Done the wii balance board check and that says it is functioning properly! It is less than 3 weeks old and I still have the receipt but wnder if anyone else has had this problem

Posted by on

  • Anonymous Jan 24, 2009

    I have tried new batteries, unplugging the whole system, simple resets, re-syncing everything I can think of and my Wii Fit is doing the same thing. As sson as you get to the step on setup before an event it say please step off me and press A but nobody is on it. Very frustrated I had people come over to play with my wife and I and the 3 week old piece of equipment would not work.


  • Anonymous Jan 28, 2009

    i tried phoning nintendo but they are useless! any ideas?

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Just ring nintendo this is a common error one of the sensors have gone, i called them and they sent me postage for me to send it back to them with a reference number and they sent me a new one just go to www.nitendo.co.uk/support and ring the number pressing the number which prompt you
hope this work
mine is working fine now got it back after around a week

Posted on Jan 24, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My wii fit was working perfectly fine when i purchased it, then about a month or so later the wi fit game didnt recognise the balance board, so when it said please turn the power button on and i did, it no...


When you power on the wii fit board, does the light flash continuously? If so, you will need to sync your board with your wii again. You can get instructions on how to do so here: http://www.nintendo.com/consumer/systems/wii/en_na/ts/balanceBoard.jsp

Mar 22, 2011 | Nintendo Wii Fit - Balance Board + Game...

1 Answer

New crown compatible wii fitness board will not sync with wii console. board only blinks a few times then switches off


Have new crown compatible fitness board, new batteries inserted, inserted Wii fitness disc, choose training, then trial, choose hula hoop game, used remote press A to start.

Screen says place me on a flat floor and press POWER button before stepping onto me

Followed the instructions power button flashes blue, as do the four corners then the lights go out - then nothing happening, still have the same message place flat on floor etc....

Have also tried the Wii Balance Board Check - followed all instructions last one says please turn on power. Pressed button flashes blue as do four corners then they go out

Am I doing something wrong or Is this a faulty board ?

Thanks

Sep 27, 2010 | Video Game Consoles & Games

1 Answer

My wii balance board keeps telling me to step off and press A, while I am not on it.


there are series of problem in wii which can be solved without much technical knowledge ........ your problem belong to that so dont worry i will give you the link to download the wii repair guide that will help you a lot Click Here

Jul 08, 2010 | Nintendo Wii Fit - Balance Board + Game...

1 Answer

What do you do when your wii balance board keeps saying please step off me and press A


Hit there

Hi there.

You may want to reseat the sensors. I have written a great tip with video about this.

Let me know what happens.

Thank you for using Fixya!

May 11, 2010 | Nintendo Wii Fit - Balance Board + Game...

4 Answers

My wii fit board keeps telling me to step off and press (A) even though i am not stood on it


iv got the same problem too, iv resync it and nothing, wiped the wii clean and started again and nothing (mine went down just b 4 xmas and 'santa' got my boy the wii fit plus and he ant been able 2 play it yep) PLEASE PLEASE PLEASE some1 help

Jan 29, 2010 | Nintendo Wii Fit - Balance Board + Game...

1 Answer

Wii fit board keeps saying get off and press A to initialize game but no one on the board. Have tried new wii fit disk but same. Other ski game works with the board


You get off press a wait for it to say step on and then get on. If it keeps saying it after you get off, take out the batteries and get a new battery pack, don't step on it at all until it loads.

Jan 26, 2010 | Nintendo Wii Fit for Wii

1 Answer

Wii fit board won't work


Hello,

Here you have different procedures on what to do if you get that error message. Please get back to me if nothing works.

The exact procedure is:

• Even if the battery level is strong, try the following:

Remove the batteries in the Wii Fit Board for at least 1 minute…… better 15

Try these steps!

1 Turn the Wii console power OFF by pressing the POWER Button on the front of the console. Unplug the power cord from the wall outlet for a few seconds. After a few seconds have elapsed, plug the cord back into the wall outlet.

2 Turn the power of the Wii console ON. When you see the Health and Safety screen, open the small flap on the front of the Wii console to find a red button labeled "SYNC." Press and hold the SYNC Button down for 15 seconds. This will clear all the syncs on the Wii, allowing you to get a clean start to begin the process described below.

3 After holding the SYNC Button on the Wii console down for at least 15 seconds, you can now "re-sync" your Wii Remotes:

a With the first Wii Remote you wish to sync, remove the battery cover on the back of the Wii Remote to find a small red button just below the batteries.

b Press and release the small red button just below the batteries on the Wii Remote; the blue lights on the front of the Wii Remote will blink.

c Quickly press and release the red SYNC button on the inside of the white flap on the front of the Wii console (picture).

d When the Player LED blinking stops and stays lit, the syncing is complete. The LED that is illuminated indicates the player number (1 through 4).

4 Start the game from the Wii Menu, then sync the Wii Balance Board from the opening screen of the game.

Hope it helped.

Nov 24, 2009 | Nintendo Wii Fit - Balance Board + Game...

1 Answer

My wii fit board keeps saying..please step off me and press A...this is when im not even on it..


the wii keeps saying step of me and press a when im not on it can anyone help its drivin my mad! please help

Nov 10, 2009 | Nintendo Wii Fit - Balance Board + Game...

1 Answer

Wii board keeps telling me to press A


most likely a bad board or cable. There is a short somewhere

Apr 23, 2009 | Nintendo CTA Digital WI-BBP Wii Fit...

Not finding what you are looking for?
Nintendo Wii Fit for Wii Logo

373 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nintendo Video Game Consoles & Games Experts

Raj Patel

Level 3 Expert

917 Answers

Julian Wainwright

Level 2 Expert

64 Answers

Martin Murray

Level 3 Expert

1623 Answers

Are you a Nintendo Video Game Console and Game Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...