Vision fitness treadmill belt crease - Vision Fitness T9250 Deluxe Folding Treadmill

First thing to do with these folding vision fitness treadmills is
REPLACE THE MAINS SUPPLY CABLE
They were supplied with very poor quality cable that cause issues like juddering stopping and speed fluctuations.

If you wish to get some details about treadmill repair ; check the site linked here. Pull up older posts. http://electro-medical.blogspot.com/

will be better that you replace go to www.fitnessrepairparts.com and get it. or www.treadmilldoctor.com

God bless you

please LUBE the deck belt see the video, lube the rollers bearing front and rear, test the drive belt for worn and replace. God bless you

see this video for way.


God bless you

Unfortunately once the belt has a crease that all she wrote. Belt replacement is the next step.Call Fitness Quest they are the makers of your treadmill @ 1-800-321-9236

Wow, this is weird, I've just come back from the gym and the guys there were 'fixing' a crease on one side of the belt.

They had the belt off the treadmill, and put a wooden board on the inside, with some weight plates on them, a few wooden blocks on the inside, so the belt looked like it was the same height as when it is fitted and then a wooden board and weights on the top.

By the time I'd finished my session, they were refitting it and it looked good, you could still see a slight dent, but not a full crease.

Hope this helps you and good luck.

Take the front cover off and see if the drive belt is on the motor. Try running it to see if the motor turns. This could be a motor or controller board problem.

Hello. A year without use often causes the belt to adhere to the front and rear drum. Pry the belt loose and toss some talcum powder in there to get it going again. Joe

Remove motor shroud and inspect the drive belt VF is imfamous for squealing drive belts better to call them and order a new belt here is their # 1-800-335 4348 Vision is now under there parent corp. name Johnson