- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
You will need the correct software installed to do this. XP does not inherently have this so those functions will not be activated. Install this software, reboot and try again. Make sure if there is function or special key to activate a dual purpose key (two functions on one key -check key face for two functions). Sometime you may inadvertently toggle this off and THINK it fdoes not work. Maybe try this first to avoid installing stuff for no reason.
It sounds like the keyboard driver software in your computer has stopped working. Keyboards with special function keys for actions like copy and paste need special driver software so Windows will recognize them. You can reinstall these drivers if necessary. They are usually stored in a directory on your hard drive; if your model came with software CDs you will find the drivers there. Your model computer may also have a selective-restore program that makes reinstalling lost functions easier. Refer to the documentation that came with your computer, or check the manufacturer's website for the drivers and installation procedure.
Hope this has been helpful. Thanks for using Fixya!
Go to Control Panel and click on Sound.
Next click Bluetooth Devices.
Click Add button, lower left corner of the Bluetooth
Devices window. Insure batteries are installed.
Press the Connect Button on the Keyboard
(Usually located on the under side of your keyboard) this allows Windows to see
the keyboard so you can pair the keyboard to the computer.
On the computer choose My Device Is Set Up and Ready To
The keyboard should appear in the Add Bluetooth Device
Select your Keyboard and click Next.
When prompted, select Choose a Passkey For Me and
Windows will generate and display a Passkey. Type the Passkey specified on the Bluetooth
(do not use the keyboards keypad when typing the passkey)
No charters will appear on the monitor when typed, but if
you make a mistake, you can backspace. You must enter the Passkey within 30 seconds.
If you don’t enter the Passkey within 30 seconds, click Back
and click Nextagain.
Once the Passkey is entered, the Keyboard should be
connected to the computer. Finish and follow any on screen instructiond.
Hope this helps.Bud
I know.....I have to ask...you've checked the batteries right? OK. Check the cable on the back to mahe sure it's still plugged in firmly. If you push the button on the transceiver, it should start blinking. Then hold the button on the bottom of the mouse until the light on the transceiver is solid. Let me know what happens. If this solves the peoblem PLEASE rate as fixed. If not, DON'Y RATE YET. Just add a comment letting me know what happened and I'm here to help you further. Thanks toba. Let me know.