Moen aberdeen #93980 manual - Plumbing

Moen 93980 Replacement Handle Mechanism Kit

Hi,

See this website (pdf) for you faucet. The plug you describe should just pry out using a small screwdriver. Plug the drains in the sink(s) before you remove the plug just in case you drop it.....:)


http://www.moen.com/shared/docs/exploded-parts-views/7590pt.pdf

There have been at least 2 different versions of the 7590C... on one version there's a plug on the 'back' (180 degrees from the handle) that covers a horizontal set screw, and on another version there's a cap on top that pries off and covers a vertical mounting screw.

User manual - http://moen.com/shared/docs/instruction-sheets/ins801l.pdf

Parts diagram - http://moen.com/shared/docs/exploded-parts-views/7590cpt.pdf

In this case, the parts diagram should clue you into which version you have better than the user manual does.

If you call Moen they will provide you with detailed repair instructions. In Canada 800 465 6130 and if not in Canada that number might redirect you OR any Moen retailer can get you the appropriate toll free niumber for your area.

If the faucet leaks tighten all connections if that does not work call Moen as their faucetts usually have a lifetime warranty.

The detailed exploded view of the parts is in this sheet.
Hope this is the right model that you have.
http://www.moen.com/shared/docs/exploded-parts-views/7590cpt.pdf

you will need to undo the nut holding the cartrigde in place. Sometimes you will have to get a special tool to undo these parts.

Hi,
There have been at least 2 different versions of the 7590C... on one version there's a plug on the 'back' (180 degrees from the handle) that covers a horizontal set screw, and on another version there's a cap on top that pries off and covers a vertical mounting screw.

User manual - http://moen.com/shared/docs/instruction-sheets/ins801l.pdf

Parts diagram - http://moen.com/shared/docs/exploded-parts-views/7590cpt.pdf

In this case, the parts diagram should clue you into which version you have better than the user manual does.

I had the same problem with my Aberdeen single lever with a pull-out sprayer a few months back. If you are the original owner of the faucet, it's under warranty; you shouldn't have to pay for any parts. Call: 1-800-BUY-MOEN (1-800-289-6636) and tell Customer Service what the problem is. They will send you the Handle Mechanism Kit at no charge. (Mine was part #93980 for my Aberdeen faucet, but yours may be a different part number.) It's tricky to take apart and get back together but my husband and I have zero plumbing experience and got it all fixed in about 20 minutes. The Moen.com website also has exploded parts diagrams of all their faucets so you can identify exactly what part you need, and they have some little videos and slideshows to show how to replace parts. If you can't reach Customer Service on the phone, you can go to "Contact Us" on their website and email them a description of your problem.