Skyscan model 27010 B

There really isn't any way to fix this, the analog clock is a quartz movement which is not synchronized with the digital clock.

Late to the party I guess. Lots of entries for setting the clock, but not for the alarm. Press the plus or minus button. That's it. After you have the time set, you can then press the ALARM button above the WAVE/SET button to turn it on.

Hi,

You press and release the mode button, then press the adjust button. This is what the instructions say to do. However, I see that you don't have an adjust button listed. I would try pressing and releasing the mode button, then pressing the ZONEDATE button and see if that will do it.

If this works, please place a vote for me. Thanks,

Handie Andie

Follow instructions DST setiings (Daylight savings time)

http://skyscanownersmanual.com/site/owners-manual

If this model has a DST switch on the back, make sure that it's turned ON. If there's no DST switch you can force a manual change by changing the time zone setting, but you'll need to do that twice a year. Also note that if the clock is more than two years old, turning the DST switch ON will make the clock conform to the old DST changeover dates.

Bill B

Make sure that the DST switch on the back of your clock is turned ON and that your clock is receiving the WWVB signal (see manual). If the clock is more that two years old it's set to the old DST changeover schedule and that cannot be modified. If it's on the old schedule, your best bet is to turn the DST function OFF and manually change your time zone twice a year. This, however, will probably not solve the problem if you're in the Eastern time zone -- your only option will be a new clock. For an operating manual on a model similar to yours, visit:

http://www.lacrossetechnology.com/8117/manual.pdf

Bill B

It did not catch the signal from the transmitter. Try re-locating it near a window, higher elevation. Also try changing the batteries if they are weak. Is it set for DST? If not, then it wouldn't change.

Keep pushing the set button until dst shows on the date window then see the clock window it will read on or off press the + button for on or off.

Just did this after problem resetting after changing batteries, press setover and again til it displays est, then press+until your time zone is displayed, it will also display dst, press +till on/or off depending on your location, then US will appear, clock will then set itself. Good luck, how frustrating.