This is an inquiry regarding the SkyScan Model 27010 Atomic Clock. I had to replace the battery for the clock and when the battery was put in, the hour and minute hands turned, nonstop, readjusting itself "automatically". However, the time and date the hands stops at is incorrect, as it continues to display "12:00 am", and "Saturday". What procedure should I follow in order to make the clock display the correct time and date?
SOURCE: I have a87900 model skyscan,can;t get it reset after replacing batteries
http://www.skyscaninfo.com/content/
they have instructions online
SOURCE: skyscan atomic clock receives time signal but is
You didn't tell us the model number but whatever it is, you should find instructions here:
Skyscan website
Our various 'atomic' clocks have either a menu that lets one select or a simple slide switch with US time zones from which to choose.
SOURCE: How do I reset my skyscan 86715 atomic clock?
SkyScan 86715:
>Press "SET" once,
>>press "+" until you see your time zone;
-4 ATL-Atlantic
-5 EST-Eastern
-6 CST-Central
-7 MST-Mountain
-8 PST-Pacific
-9 ALA-Alaska
-10
-11
-12
-6MT-?
>Press "SET" once,
DST ON/Off
>Press "SET" once,
US - duh, huh
F - MER-Mercredi, French
E - MIE-Miércoles, Spanish
>Press "SET" once,
>>press "+", for correct hour
>Press "SET" once,
>>press "+", for correct minute
>Press "SET" once,
Range 00-20; 09 = 2009
>Press "SET" once,
Month
>Press "SET" once,
Day
>Press "SET" once,
Day of the Week
>Press "SET" once,
12 or 24 hour
>Press "SET" once,
Fahrenheit or Celsius
>Press "SET" once again - DONE!!!
.
The clock should now display "month/day/day of the week/moon phase/Temperature"
.
NOTE: Moon phase and Seconds will correct on first reception from Coordinated Universal Time (UTC)
.
Lastly,
Press "+" once,
Temperature changes to seconds
>>Press "+" once,
Temperature returns on right-most panel and
seconds replaces day of the week.
>>Press "+" one last time and you are back to done!!!
.
Thanks,
.
[email protected]
SOURCE: How to adjust settings on skyscan atomic clock
I just fooled around with the settings on the back of the clock and now I think I have it. It may or may not work.
699 views
Usually answered in minutes!
×