I need a shop manual for the DeltaBS100 Shopmaster 9" Bench Top Band Saw!! Where can I download this manual?? Thank you for your time and consideration - I also assume that this manual will be a free download, correct?? Ron 707-360-8982

Try to find a local auto shop. They might a have a belt available for your bandsaw. If you need band saw blade, I suggest you visit sawblade.com .

Hi Ron,
You can download the manual from this webpage by clicking on the icon to the right of "instruction manual":

http://servicenet.deltaportercable.com/Products/Detail/BS100

You need to have Adobe reader installed on your computer to read the PDF file.

Hope this helps!

May I get the model # to help you find the manual

Go to http://servicenet.dewalt.com/Products/Detail/BS100. On the right are downloads for the parts diagram and manual.

eReplacementParts.com. Go to the link below:

http://www.ereplacementparts.com/delta-bs100-type-band-saw-parts-c-3275_3481_3509.html

Cost $2.60 time 4 plus shipping.

Delta site is a little less, $2.36 if you click on the link below and you can also download you manual.

http://servicenet.deltaportercable.com/Products/Detail/BS100

i need a manual for delta bs100 shopmaster 9 inch bench table band

Check and see if one of the guides is out of alignment or if the blade is worn. Either one can cause the problem since you already checked the tension and guides. If the guides are worn they won't hold the blade true.

Hi, This Delta saw uses a 59 1/2 inch blade ( 1511mm).
Good Luck, this should Fixya!

http://www.dewaltservicenet.com/documents/English/Instruction%20Manual/Delta/En1346498.pdf

Here is a link this saw will be hard to find parts for I hope you the best of luck

http://www.dewaltservicenet.com/Products/ProductDetails.aspx?pid=64873&tid=14622