20 Most Recent SATO CL612 Label Printer Questions & Answers

contact on 9422301045

Did you install microsoft net frame?

https://www.manualsdir.com/manuals/136661/sato-cl408e.html?page=100 Free manual at link shown above: Card R/W Error 1. No card is inserted. 2. Card is write protected. 3. Invalid store/recall number. 4. Card has not been initialized. ERROR LED: On Audible Beep: 1 long Display: Card R/W Error Printer must be powered off to reset. 1. Insert card into selected slot. 2. Remove write protect tab. 3. Correct program 4. Initialize card with BJF command

https://www.itgstore.ro/download/SatoCL408_service_manual.pdf The CL408e printer delivers performance at an affordable price! The CL408e is an advanced performance, high value printer that is truly a SATO through and through. The CL408e features a 32-bit, high speed RISC processor for maximum performance. It also includes the exclusive SATO printhead control feature, which constantly monitors printhead conditions and automatically adjust print energy for optimum and consistent print quality. The CL408e prints labels up to 4.1" wide at 203 dpi all at speeds of up 6 ips

Reboot the computer and the printer.

Pano mag-install ng canon printer?Pinagawa na ang printer namen pero hindi maka pag-print.

It won't auto install that driver you need to download the driver and install it manually. This is assuming that widows correctly identifies the printer, if it says unknown device you may have a defective USB card. http://www.themrpsolution.com/SearchResults.asp?Search=sato+usb&Submit=

Go to the driver(Printers and drivers/Select your printer/right click / properties). On the general tab, select from "media type" the kind of printing method you are using. If that doesn't help, download a driver from www.nicelabel.cl, then use the Calibrate option, you should be fine.