20 Most Recent
Casio LK30 Note Lighted Keyboard - Page 6 Questions & Answers
Is there any way to connect my casio ctk1100 to a laptop??
Yes. But it depends which connectors you have on your laptop. If you have a small (3.5mm) stereo jack input, then you need one cable with a small stereo 3.5mm jack on one side and a big stereo 6,3mm jack on the other side. (Take a look at the picture below). Then you plug in side with a small stereo jack in your laptop "line in" input and other side of the cable with a big stereo jack to your Casio CTK-1100 Phones/Output plug on a keyboards rear side... Be sure to adjust the volume on both the Casio (output volume) and laptop (input volume)... Cheers!
3/2/2017 5:16:31 AM •
Casio Music
•
Answered
on Mar 02, 2017
I have a casio WK1300 with only a 2 pin plug. I want to put a 3 pin plug with an earth & fuse. what ampage fuse should I use in the plug, 3,5, or 13amp?
This device operates internally at 12VDC. It can run on D-Cell batteries. It uses a transformer-based power pack to convert A/C to DC for the unit. What possible benefit do you see in converting this (if you even could) to a 3-wire grounded system? There most likely is already a fuse incorporated into the PCB internal to the power pack. You cannot wire A/C directly to the device as it is not internally capable of using the voltage. Any ground that you placed on the device would only be effective to the power pack and would not continue on to the device itself. It seems like a waster of time and effort.
9/7/2016 3:29:38 PM •
Casio Music
•
Answered
on Sep 07, 2016
Not finding what you are looking for?