20 Most Recent
Compaq NC6000 Notebook Questions & Answers
Computer compaq nc 6000 powers
Could be either the power supply, the power supply connector plug on the motherboard, or a defective/loose stick of RAM. Is the connector on the computer wiggly? If not, can you get access to a multimeter, so you can check the output voltage of the power supply?
Everything ok yesterday and at least the last two
Sounds like Maxim 1987 chip needs resoldering onto mother board. There's many entries on Google that tell you how to do it, but it's a hard fix for a non expert solderer. Pressing down on the right hand side of the keyboard as you switch on will often allow the laptop to start up (temporarily). GOOD LUCK!
Compaq nc6000 my pc sometime
hi
open laptop open board look back side board near proccessor side ic maxx 1987 heat whit heat gun station 2 3 minuts then asssembel turn on and enjoy
I want to restore it back to factory settings
Hope this steps will help you in restoring
a. Reboot your Compaq Laptop, You have to press F10 key when there is HP
logo appears, press it until recovery screen.
b. When recovery screen appears, Choose “Next” and You may have to
select “Yes” to non-destruction recovery
c. If you want to desctructive recovery, you may select advance and
select “Yes”.
d. If your recovery finished, your laptop will reboot automatically and
you’ll get fresh Operating system in your laptop.
Let me know if it helped you
Thanks
I have a NC6000 that will turn on the screen for
Usually it's in this order. Inverter, lcd / backlight, gpu
A local repair shop would be able to confirm which one. Or you can just order a replacement from ebay for about 10-15 and try replacing it yourself. It's not hard.
Will not boot up
it is not booting because the operating system must be corrupted.. or the power supply hardware is not working,
I CAN'T CHARGE MY PC
Hi,
You probeply doesnt have the origional Charger if so you have to buy Compaq charger becaus it come in 3 lines (2 for Power and 1 for Data) that will tell the bettery to charge.
If you have the origional charger then you have to replace your buttery.
the buttery may damaged if you charge it for long time continuously... or if its too old.
Keypads when pressed are not working
The beeping is being caused by the stuck key.You need to clean the keyboard.the keys can be popped off and dirt removed with a q-tip.wash keys with warm water after removal dry and replace.RICHARDM69
Compaq nc6000 notebook?
Now a chineese had found out what is wrong. You have to resold a part on backside of the motherbord - Google on NC6000 MAX1987 and you will find a solosion.
Internet
run your computer in safe mode with network options. If you browser works fine then you need to update it. Need more info goto
[email protected]
Not finding what you are looking for?