Question about Viper Vehicle Parts & Accessories
...and, the alarm does not trigger then, you have the wrong door trigger wire connected. If you were to list the year, make and model of the vehicle I could direct you to the proper wire and
...the GEM module. If it is a negative trigger solder in a 3amp diode with stripe towards the door then solder the door trigger from the alarm to the door side of the diode. Repeat for all door
...door and only when someone will open this door the alarm would turn on. The sophisticated system has interior pressure sensors and cover for all the doors and every vibration turn on the car
...alarm thinks the door is open even if the doors are closed. you can fix that by having a tech hook up the door triggers to the door latch wires and not the domelight itself...or you can program the ...
...door only for the alarm to stop but after some time it goes off again. Your problem is most likely the central locking / alram switch fitted aroun the door lock inside the door void. Try using the ...
Question about Vehicle Parts & Accessories
alarm but no door was opened. Got any ideas? if im not mistaken it does that because your interior lights dont turn off as soon as you close the door.. it delays a lil bit, and when you set your alarm
...alarm dosent read the door being open, if the alarm dosent read that the door is open you should be grounding out the door trigger (green wire in most alarms) and repeat steps to deactivate the ...
...the key hole of the driver's door, turn to unlock, this disarms the factory alarm. Turn to lock, this arms the factory alarm. Now, if you have an aftermarket alarm this procedure does not
...is working? roll window down before you close door press lock on the door switch. close door. wait 3 min. reach in unlock door only and open door from inside. if horn honks then there is an
14 questions posted
Usually answered in minutes!
137 Questions
59 Questions
43 Questions
34 Questions
3 Questions
