...LEVEL SENDER LOWu1064 = LOSS OF TSM/TSSM/HFSM SERIAL DATA OR SERIAL DATA ERRORu1040 = ?u1255 = SPEEDOMETER SERIAL DATA ERROR/MISSING (carburetor model) ...
...level usually run from 175 -250 cc per fork, too much oil will cause fork to be stiff, not enough can damage fork seal, so go by trial and error but the amount should not run far from above numbers. ...
...Engine says .98litre with filter out, Manual says the same, however manual also says set oil level by site glass and thats not happenning with .98 of a litre. Also some more conflicting info ...
Question about Yamaha YZF-R1 Motorcycles
...and temp gauge flashing with no reading? i have the exact same problem. i've checked all fluid levels and they are fine. but mine does seem to run a bit lumpy when the light does appear. have
...If you put too little it bottoms down and the reverse would be a hard rebound. So, if you are refikking it yourself, try using 300cc to start and do atrial/error way to reach the level you want. ...
131 questions posted
Usually answered in minutes!
183 Questions
188 Questions
167 Questions
125 Questions
113 Questions