Question about Yamaha Royal Star XVZ 1300 A Motorcycles
...change clutch slave cylinder . any hidden surprises when removing None that I can think of: the push rod it activates will stay in place unless you extract it. you will need to remove the shift pedal ...
Question about Yamaha Royal Star XVZ 1300 A Motorcycles
...change in the color of the fluid (8). Sometimes it's subtle--at least it will be if you haven't let this job go for too long. Keep bleeding the system in steps. Grip the clutch lever and pump two or ...
Question about Yamaha Royal Star XVZ 1300 A Motorcycles
...clutch slave cylinder.oring pushed out of cylinder. After changing clutch. Have changed the caliper and piston. Same again :-( 2011 85h trying to buy a Gas gas contact 125 clutch slave cylinder any ...
Question about Yamaha Royal Star XVZ 1300 A Motorcycles
...clutch slave cylinder. As the cover was tightened down it's pushed the slave cylinder piston too far back. Remove the slave cylinder only (3 x 8mm head bolts) and check it operates properly, then ...
Question about Yamaha Royal Star XVZ 1300 A Motorcycles
...change, the clutch shaft is going through it from slave cyl. to clutch. You can try change it from left side, but I think easier from right, but you have to take off right engine cover and complete ...
...and my water pump is working how it should.. The only thing i can think of is the slave cylinder.. Plz help Try changing the hydraulic clutch fluid as it sounds like its failing as it gets ...
Question about Yamaha Royal Star XVZ 1300 A Motorcycles
change my slave cylinder first befor I tear into the clutch plates,so would the bike even go into gear if the slave cylinder is As I was riding the bike it started slipping and the bike got slower and
Question about Yamaha Royal Star XVZ 1300 A Motorcycles
...slave cylinder, and then operate the clutch lever. If it can pump oil through the hose and feels unimpeded with the line disconnected, then it is the slave faulty. If it is still bound up, then it is ...
...Clutch Slave Cylinder Stuck My clutch burnt out so I have replaced the clutch plates drum basket springs rubbers and so on, including the control rod because it had broken. The Clutch lever however ...
...clutch push rod come out so that I can't get the pressure plate back on. How do I depress the push rod? pull the slave cylinder off and push the piston back in the cylinder then replace all should be ...
155 questions posted
Usually answered in minutes!
83 Questions
56 Questions
37 Questions
10 Questions
4 Questions