1996 Yamaha YZF 600 R thunder cat "whats factory setting pilot screw" Questions

...idle after warm up as the pilot screws are preset at factory and the manual dose not give any info dose anyone know what factory setting is? how many turns from fully screwed in should they be

...setting for it starting from being screwed right in as far as it will go.i do understand all bikes are set up differantly and i can play with it once its running but i would like to no what is the ...

...factory setting for mikuni vm26 carbs on a 1978 suzuki gs1000e main jet 145 jet needle 4h11-3 needle y-2 pilot 17.5 float hight 26.6mm pilot air screw 2and a quarter turnsout main air jet 1.0mm pilot ...

...and cant get bike to idle properly how many turns from fully screwed in is a starting point or what is the factory setting carbs has to be synced again, I reccomend by a pro, Its a tedious ...

...pilot screw settings were wrong, What do they do exactly? Screw is the one on piston side of carb. Is in LEAN OR RICH??? I get good idle bike falls on throttle movement open 1/8 to 1/4. I open screws ...

What is the factory pilot screw setting for a 2002 Suzuki GSF 1200s? It fine tunes the mixture.

factory setting for the pilot screw? Any idea which way I turn it from where I am now, or should I start over? not sure about Suzuki but when i did my honda cbr they suggest to seat the pilots lightly

...setting for the pilot screws. They're all set differently from the factory, based on the individual carb settings. You'll basically need to start at a baseline of 1.5-2 turns from seated (lightly ...

...factory set pilot screw another quarter turn i believe counter clockwise made a hell of a difference. usually these are capped off so people cant mess with the settings, so i just took out my carb ...