1995 Yamaha FZR 600 "motorcycles starts put gear" Questions

...starts up just fine but when I try to shift into 1st gear, the engine cuts out. I've had problems in the past where it does not shift smoothly (e.g. slight grinding of gears) or the clutch does not ...

...working. now when you say no clutch action??... as in when the bike is running and in gear you let it out and nothing happends or you try to put into gear and it jams into gear and stops the

my bike starts but when i put it in gear it cuts off< what is the casue of this?? sounds to me like a side stand switch needs adjusting

...starts on the button no probs revs up lovely but as soo as i put it in gear and go to pull off it misses and bog down then when it gets passed 6-7000rpm it goes like hell all the way to the read line ...

...put in new plugs and a new battery but it will not start any ideas Something simple like on the throttle side of the handlebar just to the inside of the twist grip is a switch most often they are red ...

...put the bike in first gear. The engine revved as i let go of the clutch but there was no forward movement. i released the clutch to make sure the bike was in gear and nothing happened. the engine ...

...is only when the bike is put into gear it will shut off the bike if stand is down. my bike fires up just fine but when i kick into first gear it shuts off Check the ignition switch or kill

...put everything back together I have a problem. The bike will from neutral to first and back without the clutch lever pulled in. However it also won't go into second or any gear above. Did i miss ...

starts and runs fine until I put it in gear and then it dies. Any ideas what could be the cause? Def make sure your kick stand is up then if it is and it still dies try disconnecting the safety switch