1990 Yamaha XT 600 E "check cdi box good" Questions

...cdi or other components. I live in Colorado, is jetted for Aspens altitude. Thx, Dan Check your valve clearances, They should be (cold) 0.07 - 0.12mm intake, and 0.12 - 0.17mm exhaust. Is muffler ...

...CDI of a 50cc TGB Bullet Anon, Check the attached links,instruction and guides, Good luck "I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other ...

...are notorious for breaking wires so check the wiring from the cdi sender unit to the cdi box and the coil,also check your "off"button it may be stuck in the "kill" position..hope this helps..cheers ...

CDI box, if none check for voltage out of your stator (over 100V) and your trigger or pulse coil (over 3V). If you find voltage at the stator and not the trigger replace the trigger and vice versa. If

...firing, the cdi box has been dangling and bumping on engine, don't know if this is problem or not maybe gone bad? wont do the cdi box much good, have you changed sparks and checked starter ...

CDI) box, or the Ignition Pulse Generator? It is a toss up. You can check the pulse generator with an Ohm meter. A nice dealer can give you the specification. You can test a CDI box with an Ohm meter

...check ? ive checked the plug wire and grounds they seem fine , and the coils grounded good and the cdi box looks good inside Had similar problem with a 125cc scooter I worked on.  First crank of ...

...check if the CDI is good is to check the external connections; if they are good and yet no spark, then the CDI is bad. How to check the above: to check the pulser coil, measure the low voltage coming ...

...Check on line for a used one or new at better than dealer price. GOOD LUCK.....GREASY. i have a 89 350 warrior and i was wondering if i could adapt a 90 style cdi box to my 89 the two boxes should be ...

bike will not spark but gets gas Check for 12v to coils & ignition box/ CDI/ unit. If good, Most likely CDI unit has failed. Try Ebay or salvage