1980 Yamaha XJ 650 "front forks" Questions

forks come off of a yamaha 750 seca. The seals are leaking and I need to change them. But I cant get them off the bike to remove the leaking seals. And I dont see any way to get them off....Thanks for

leaking seals front forks 84, 650cc you should change oil and oil seals at the forks

...air pressure for front forks on a Yamaha XJ 650 32psi / 220kpa in the front, and 36psi / 250kpa in the rear. :) Love guys like Murtaza who don't even read the question. IIRC 5.7psi factory, 17psi

...front forks and one on the rear frame. Could you tell me what psi they should be set at That information is usually in the owners manual. would advise contacting your local dealer to see if they are ...

...front forks had 5.8 inches (147 mm) of wheel travel. The five-way adjustable spring preload rear suspension had 3.8 inches (97 mm) of travel. The bike had a hydraulic single-piston, single-disc front ...

...front forks on my 1999 Suzuki Marauder VZ800. FORK OIL ? Place the front fork vertically without spring. ? Compress it fully. ? Pour specified front fork oil up to the top level of the outer tube. ...

...front forks i have a oil leak Your front fork seal are bad and need to be replaced. When you loose fork oil, your loosing suspension dampening and only riding on the springs.(POGO) Replace both front ...

...front forks on a 2002 Yamaha TTR 125 L Our 2002 Yamaha TTR 125L did a wheelie over a car and landed on the front wheel then fell on it's left side on the sidewalk. It still starts up with no problem, ...

Front fork seals need replacing , is a specialist tool required to take the forks apart ? Is it a very difficult job. hi non usd forks are ok thers a allen key bolt at the bottom of the fork leg would

...front forks please. Question edited for a lot more clarity, 'year make model', first 3 words! FRONT FORK Capacity: 0,13 litre. 20W Fork Oil. ...