ignition 1972-73 yamaha enduro dt2 or dt3 eng 250, . removed wiring harness, lights turnsignals ect, i want to ride just on dirt, the wires coming out of the magneto (5 of them) green/red, green, ...
head lamp problems i have a 74 yamaha dt360 enduro. my problem is the simple fact that the head light blows out everytime i start go ride. it will work fine just idling. I was told that the magnito ...
Question about Yamaha DT 360 Motorcycles
the horn not working dt250, have power to wire at horn . Should a horn sound if connected to a 6 volt battery to test horn? Does the horn have 2 wires or 1? Newer Yamahas have 2 wires....power to the ...
1978 yamaha dt250 no brake lights,turn lights,no horn only front headlight good fuse runs fine MAKE SURE THE BATTERY IS IN A GOOD STATE OF CHARGE, ON THE OLDER BIKES WITH AC LIGHTING THE BATTERY ACTS ...
...out. 4) Hotwire - find the kill switch and unplug it. if this doesnt help unplug the ignition key wiring. on older bikes it will work for ignition but not lights for the key part. if this helps you ...
...light wiring and stuff is messed up. anyone know where i can find a diagram? Go to the web page link below http://www.slimduck.com/dt100_175_wiring.html Hope this helps I'm looking for a complete ...
Question about Yamaha DT 360 Motorcycles
I have a 1974 Yamaha DT360. Everything works except directional signals. I have power to both rear flashers, no power to both fronts. Check in back of or inside of the headlight globe to make sure ...
Does a DT250A trail bike have a neutral light switch, if so where is it located? usually the neutral switch is on left side of engine on top of transmission...Yamaha often uses sky blue for the wire ...
110 questions posted
Usually answered in minutes!
42 Questions
27 Questions