2008 Triumph Thruxton 900 "tight steering motorcycle" Questions

is off the ground. Turn steering side to side, if it seems to stick in the middle,(in the riding straight position) then bearings need to be replaced. Also check swing arm bolt is tight and axle bolts

I have a motorcycle with tight steering how can I adjust look in manual find one here free http://www.repairmanualclub.com/motomanuals/index.php

...steering head bearings on the Honda ANF125 as there is resistance when you turn the handlebar? Thanks It's probably due to rust or dirt. They should be a little snug, but not tight. do u have link to ...

...are off. when i turn the steering back,facing to the left,the power comes back. i can start the bike again. could it be the wiring? ignition switch wiring is pulling tight as you turn the

...You have to check all this and rule out any. If its the steering bearing being tight, thn the bike would also not be stable on the road, so I guess it has to be the front brakes..... Hope this

...tight -steering should flop over when just off center ,if not -too tight loosen just enough.if still play after tightening, check bearing condition. also check front wheel bearing for play, and look ...

...tight and the steering is stiff. Too loose and the steering is squirrelly. Note; the bearing may have gone bad. If so, replace it. Once the bearing nut is set, lock it down with the lock nut. The ...

...steering head is tight, with no play, like I'm willing to bet it is then look at the front tire. The tread blocks should be smooth to the touch. Turning a bike puts a lateral wear on the tires and ...

...wheel bearing looseness. Check sidewalls for bulges and bead seating. Check steering head bearing

hard steering If your steering seems too tight, take it back to the dealer. There is a specific method of adjusting this. Steve