2004 Suzuki VL 800 Volusia "type gearbox removal" Questions

Ad

Question about Suzuki VL 800 Volusia Motorcycles

1 Answer

...gearbox. Replace the waterpump seal. Most suzukis' use a mechanical seal. they are prity easy to change- although usually requires removal of the clutch cover. I always replace the mechanical seal, ...

Ad

Question about Suzuki VL 800 Volusia Motorcycles

3 Answers

...gearbox here: ...

Ad

Question about Suzuki VL 800 Volusia Motorcycles

1 Answer

type of filter do I use? Where is it located? What is the correct way to drain the oil? How oftern do I need to change the oil? Use 10w40 in the gearbox. Get the oil from your Yamaha dealer along with

Question about Suzuki VL 800 Volusia Motorcycles

1 Answer

type you remove the screw & fill thec gearbox untill oil starts to leak out of it with the bike upright. Your bike will have one or more of these oil level checking systems. If your totally unsure

Question about Suzuki VL 800 Volusia Motorcycles

1 Answer

...type of oil do I need in the gearbox? Also what is the recomended pre-mix ratio? Hi, The bike uses around 600ml of gear oil, but you should always check the level at the level bolt. When the bolt is ...

Question about Suzuki VL 800 Volusia Motorcycles

1 Answer

...to treat it to an oil change. It should have a level plug or a dipstick to check the level. Plug types require you to remove the plug and top up the oil until oil starts to leak out of the plug to ...

Question about Suzuki VL 800 Volusia Motorcycles

3 Answers

...gearbox as a whole because yamaha is greedy. sound like you have a problem with either the rear u joint attaches to the diff or it is in your differential clutches The noise is quite possibly a dry ...

Question about Suzuki VL 800 Volusia Motorcycles

2 Answers

...gearbox oil, ( 10w40 ), then ride for 50 miles. Now change it again. This should flush out the dirt and grit in the clutch plates. Also, remove the gas tank and then replace the clutch cable. Cables ...

Question about Suzuki VL 800 Volusia Motorcycles

1 Answer

...type of grease, then it would have to be from the swing arm being over-greased. If the grease is liquid then it would be coming from the output shaft seal. Get a new seal then remove the sprocket and ...

Not finding what you are looking for?
2004 Suzuki VL 800 Volusia Logo

169 questions posted

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

Bob G

Level 2 Expert

104 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...