2003 Suzuki TL 1000 R "exhaust" Questions

tl head removal Can you pull the front head without dropping the motor? A broken exhaust bolt is forcing a trip to the machine shop. You can actually tilt the engine towards the front tire -rotating ...

...leakage problem. Now when i try to start my bike it keeps turning off, then smoke comes out of the exhaust .... this problem wasn't accruing before ... any answers or ideas to what the problem might ...

... i checked the basics, changed the plugs, the burn was good both cylinders have relatively the same exhaust temp. as long as you stay within the first 30 to 40 % of the throttle there is no problem. ...

rusty exhaust header bolts how do you get them off with out brakeing them the bike is a suzuki tl 1000 r Spray the bolts with WD40 several times over a two hour period. Use an impact driver and metric

...then, but no big deal. The euro bikes are a lot more restricted, emission wise, and I'm sure the exhaust and lights and all that are the same. We do have the same bikes here, not like a big ...

...#3 C35 - INJECTOR SIGNAL #4 C41 - FUEL PUMP CONTROL SYSTEM C42 - IGNITION SWITCH SIGNAL C46 - EXHAUST CONTROL VALVE ACTUATOR (1000

...look for corroded, broken, or loose pins/sockets. 6. Installation of aftermarket accessories ie. exhaust systems, mufflers, air cleaners, fuel tuners, electrical component, etc. For more ...

how to remove baffles Step 1 - Remove Exhaust Remove the whole exhaust from the bike. Step 2 - Drill Out the Baffle With a ½" hole saw and a handheld drill, insert them into a hole in the exhaust's ...

Exhust My Cagiva Raptor 125cc has a split in the exhaust just after the box going right round the circumference of the pipe. I am going to get an arrow exhaust in a few weeks so just need a temporary ...

backfire on deacceleration after fitting new vance and hines exhaust bike backfires on deacceleration Get the fueling set up on a rolling road. Honda set the fuelling to suit the Emissions and the ...