2000 Suzuki GSX 600 F (Katana) "set" Questions

Ad

Question about Suzuki GSX 600 F (Katana Motorcycles

1 Answer

fuel setting on GSX 600 R The fuel setting only works on the ' pri ' setting and not on the ' on ' or ' res ' settings on my 1998 GSX 600 R Hi and welcome to FixYa, "PRI" is a setting that would allow

Ad

Question about Suzuki GSX 600 F (Katana Motorcycles

1 Answer

2000 Suzuki GSX 600 F (Katana) how to set the float height how to set float height on a 2000 gsx600f katana @ Remove the carbs from the bike, then remove the bottom of the carbs to gain access to the ...

Ad

Question about Suzuki GSX 600 F (Katana Motorcycles

1 Answer

fuel setting on GSX 600 R I got a reply about fuel only working on pri and not on the on or res setting.This does not work even when i drive it for a while and i change it to on or res.I have tried ...

Question about Suzuki GSX 600 F (Katana Motorcycles

1 Answer

...this bike in bits when rebuilding carbs found someone had been in at mixture screws dont know the settings for these and when i was trying to sync the carbs the idle was very eratic near impos to ...

Question about Suzuki GSX 600 F (Katana Motorcycles

1 Answer

starting troubles i have a 2000 600 suzuki katana that i believe the timing on the cams is set on the exhaust stroke instead of the compression sroke can you tell me how to set the cam timing Did you ...

Question about Suzuki GSX 600 F (Katana Motorcycles

1 Answer

cant set idle if the carbs need to be synced or if there is a leak in the intake the idle will not be able to be set correctly. Sync the carbs off of the #1 carb which is the carb to the far left ...

Question about Suzuki GSX 600 F (Katana Motorcycles

1 Answer

I NEED TO KNOW WHT THE IDLE SCREW USLEY SET FOR THESE KIND OF BIKES I USLEY SET THEM TO 1.5 TURNS BUT IM NOT REALY SURE HOW MANY TURN I SHOULD GO I TRIED THE 1.5 ON THIS AND IT STARTED AND THEN IT ...

Question about Suzuki GSX 600 F (Katana Motorcycles

1 Answer

...after I close the choke. Deal already replaced Carburetor......I just start after winter I would set the tickover screw on the carb up a bit to increase the tickover speed and set the mixture

Question about Suzuki GSX 600 F (Katana Motorcycles

1 Answer

revving at 5000 rpm because carbs not set up need help with screw settings please Try turning the idle screw assembly down it turns all 4 carbs at once.thumb screw attached to rubber hose just below ...

Question about Suzuki GSX 600 F (Katana Motorcycles

1 Answer

wont idle at a set rpm consistantly, i set the idle with the adjustable nob, but it changes between 1000 and 3500 rpm. also when i shut it off i hear a hissing air leak comming from the gas tank ...

Not finding what you are looking for?
2000 Suzuki GSX 600 F (Katana) Logo

72 questions posted

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

Bob G

Level 2 Expert

104 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...