...rear brake pads... Loose rear brake pads On most if not all brake calipers there is a spring plate that keep tension on the brake pads from rattling.Also when a brake job is done silicone is applied ...
...rear of the motorcycle, install the new pad and install but do not tighten the pad pins, then pump the rear brake pedal to move the inside pistons out until they they contact the inside brake pad, ...
Question about Suzuki GSF 250 Bandit Motorcycles
REAR BRAKE DISC HAS 8 VIBRATION BUSHINGS THAT ARE LOUSE. Hello Dale, this is an easy job on your bike. Use a flat head screw driver and remove the brake pad cover...it will pop off. Remove the hairpin
Question about Harley Davidson Motorcycles
rear of motorcycle. THEN install both pad pins through holes in the inner and outer brake pads and tighten them to 180-200 in-lbs which is (20.3-22.6 Nm). THEN pump the brake pedal to move the pistons
brake pads (front & rear); carb and tank condition, A rebuilt/clean is a wise action; sparkplug check/replacement. Note the color/condition of the ends of the plugs; valve check/adjustment; electrical
23 questions posted
Usually answered in minutes!
16 Questions
11 Questions
11 Questions
3 Questions
1 Questions