2008 ktm sxf still pulls along even with the clutch pulled in 1.If the bike has been sitting for some time the clutch plates may be dry- remove plates and soak in oil overnight. 2. Check steel clutch ...
...gears? If the judder is only in first gear, the problem is either broken gear dogs on a slider gear or broken teeth on first gear. A bent shift fork is a possibility but if it shifts in and out of ...
Question about Motorcycles
...GEARS WONT ENGAGE . bike stalls out when clutch is fully released , but wont adjust correctly , engine revs freely then judders & stalls out . So if you raise the revs to say about 4000 rpm and let ...
...gears to get the revs up to avoid this,once you get past this flat spot the engine is fine and there is plenty of power the bike is standard I looked it up, there is no word in the english langauge ...
I have a judder problem on my yzf 750 this only happens when setting off in first gear if I keep the revs high I can avoid the judder but at low revs judders every time bike runs as it should through ...
judder on deceleration bike ticks over fine and will accelerate up through the gears, but if the revs die off the engine seems unballanced and feel like its going to die, keep the revs high it goes ok
engine judder the bike as been in storage, everythings been cleaned out or replaced ticking over lovely with a thump, thump thump. i put it on its stand and into gear as it runs its starts to ...
xf650 freewind engine judders when in gear in every gear ?
...fine in all other gears. it makes the bike judder as if the drive is slipping. thoughts please howdy um check your clutch oil reservor you could possibly need some 4stroke motorcycle oil have agood ...
mower jerks letting out clutch THE CLUTCH HAS GOT A JUDDER WHEN I RELEASE IT IN THE FIRST GEAR (TENDS TO LEAP FORWARD) make sure cable is routed right and not in a bind
87 questions posted
Usually answered in minutes!
45 Questions
33 Questions
29 Questions
25 Questions
26 Questions
