Question about KTM SX 125 Motorcycles
...ingear 1st gear light is flashing on display, stuck in gear and cant start it. Normally rocking it back and forth releases gear but wont do it this time. Sounds like the bike has a bent shift
...wont change from 1st to 2nd or 3rd. the only gear i have is 1st and N. thanks The bike has some bent shift forks. The repair is pretty major and requires some special tools. I include a generic ...
...1st gear even with the clutch pulled, it wont roll. Need fixed asap. Worried about driving it in 1st and 2nd on a normal day and the trans locking up on me. sounds like shift lever adjustment problem ...
...wont 1st gear to set off in town hi there it sounds like the dogs on the first gear are damaged and need to be straight cut or just replace the gear ,this is a pretty big job so a dealer might be the ...
...wont hurt it its oil lubricated constantly, sitting on the bike pull the clutch in with your left hand and click the left foot lever down in to 1st, then learn how to click it back up 1 half movement ...
...gear works fine but 3rd Bent shift fork is your problem.1st and 2nd working fine,wont go into 3rd,replace the shift fork and stop being so hard on the shifter.Costs a lot of money to fix these
only have 1st gear i have replaced my clutch cover and i now only have 1st gear will not select up gears like its wont move up clutch push rod my be broken or out of adjustment.
04 ozark 250 4 wheeler wont go into 1st gear my suzuki ozark 250 wont go into 1st gear Check the clutch lining and release bearing. Normally, you would also have to change the pilot bearings.
...wont shift 2000 xlch 10000 miles not ridden hard the shifter lever just moves up and down not shifting. does the trans need to be in 1st gear when removed. and how can i get it in 1st before its ...
19 questions posted
Usually answered in minutes!
25 Questions
17 Questions
16 Questions
13 Questions
11 Questions