Question about kawasaki VN 1500 Vulcan Classic Motorcycles
...when throttled when throttling the bike the over heat light comes on then the bike sputters from safety shutdown then takes off and repeats change your temperature sending unit or check it's ...
Question about kawasaki VN 1500 Vulcan Classic Motorcycles
...sending unit. With the engine at normal operating temperature (hot after 30 min spin), at 2500 rpm or above, oil pressure should be above 20 PSI up to around 30 PSI. It may go as low as 5 PSI on idle ...
Question about kawasaki VN 1500 Vulcan Classic Motorcycles
...temperature. Hall sensors have been replaced with no change in symptoms. Note only the sensors were replaced, wiring harness and sensor mounts all original. I have a scope trace of the trigger wires ...
Question about kawasaki VN 1500 Vulcan Classic Motorcycles
...temperature sender unit from the left side of the engine behind barrels - the temp display on the dash starts flashing FI CHECK - I suppose this means it is working. 5.i tried finding the location of ...
...other options could I check to find out why my fan motor is not coming on when it need to? TEMPERATURE SENSOR TO FAN APPLY VOLTAGE TO FAN LEADS...IF FAN WORKS IT IS MOST LIKELY TEMP SENDING UNIT TO ...
Question about kawasaki VN 1500 Vulcan Classic Motorcycles
...it can get power, because if not check for a fuse. If the above doesn't work then the coolant temperature circuit is faulty. Sending unit could be bad for hte coolant temperature sending
27 questions posted
Usually answered in minutes!
175 Questions
86 Questions
60 Questions
52 Questions
44 Questions