Question about Harley Davidson XL 883 Sportster Motorcycles
...rear wheel and then remove the primary chain, the clutch, the engine compensating sprocket, and the chain adjuster as an assembly and then remove the primary chaincase housing. Support the bike under ...
rear wheel Take the nut off the rear axle and loosen the belt adjustments just a little. The axle slides out unless your exhaust system is in the way then you'll have to remove the muffler or whatever
Question about Harley Davidson XL 883 Sportster Motorcycles
...rear wheel and the shock on the right hand side. You should be able to work the belt off the front pulley and get the new back on. When you put the new belt on and tension it, make sure you keep the ...
Question about Harley Davidson XL 883 Sportster Motorcycles
...rear wheel is removed and installed, the lug nut torque must be checked within 500-1000 mi (805-1610 km). THEN re-connecting the battery negative (-) cable and tightening the screw to 60-70 in-lbs ...
Question about Harley Davidson XL 883 Sportster Motorcycles
...rear wheel from a 2007 Harley Davidson 883 sportster? Since it has a flat, dcan you just patch it up or do you plsce a tube in the tire or do you just buy a new tire? Haven't solved the problem yet ...
Question about Harley Davidson XL 883 Sportster Motorcycles
rear wheel, it is not necessary to remove the drive shaft. The first step is to get your rear wheel off the ground. The easiest way to do this is to put your bike on its center stand. However, not all
rear wheel from the 2002 Intruder 800 without damage to the driveline? In order to remove the rear wheel assembly, you are going to need a motorcycle lifting jack stand or similar device. 1. Stand the
rear wheel removal In order to remove the rear wheel assembly, you are going to need a motorcycle lifting jack stand or similar device. 1. Stand the bike on the side stand On the left side of the rear
Question about Harley Davidson XL 883 Sportster Motorcycles
...rear wheel to repair puncture In order to remove the rear wheel assembly, you are going to need a motorcycle lifting jack stand or similar device. 1. Stand the bike on the side stand On the left side ...
...rear wheel on Suzuki VL800 to repair puncture In order to remove the rear wheel assembly, you are going to need a motorcycle lifting jack stand or similar device. 1. Stand the bike on the side stand ...
134 questions posted
Usually answered in minutes!
138 Questions
56 Questions
35 Questions