2005 Harley Davidson XL 1200 C Sportster Custom "handlebars move down" Questions

...move the throttle switch housing down on the handlebar, check the rear brake light. If it is on continously, you must move the front brake master cylinder down against the switch housing. Loosen the ...

...move easily try getting as much oil down the cable as possible. Repeat looping and testing and lubing until inner cable moves freely. Replace on bike make sure you adjust correctly and have enough ...

...move the master cylinder away fromt he switch housing and loosen the throttle cables to get the lower half down from the handlebars. Locate the front brake light switch. It has a button that points ...

move the front brake master cylinder down the same way to put the brake light out. If this doesn't fix it, try loosening the throttle and idle cable just a bit. You should have some freeplay in it. If

...I adjust handlebars on 2002 shadow 750 spirit. Laid it down (while not moving) and tweaked the handlebars. no apparent damage other than that. loosen the head stock bolt/s off and make the ...

...down against the handlebar switch housing so you brake light will work correctly. If this doesn't work, try loosen the cables just a bit. If they're adjusted too tight, the throttle will stick. If ...

...handlebars, look up and see if you see a pin that comes out and rest against a tab on the lever. If so, press this back into the right handlebar switch housing to see if the brake light goes off. If ...

handlebars, is the clutch lever loose to move up and down, or perhaps the throttle grip loose? Are the wires on both sides of the handlebars aligned with the dimples? If it is happening when you shift

move the master cylinder towards the center of the handlebars just a bit. The remvove the two bolts that hold the right handlebar switch housing together. Carefully move the top half away. There are a

...move forward. There is a tap on the backside of the lever that presses the front brake light switch turning the brake light off. When you pull the lever, the tab moves forward and releases the switch ...