2003 Harley Davidson XL 1200 C Sportster Custom "accord throttling" Questions

I have a 2003 XL1200 tried to put old throttle and idle cables back on after switching bars and they are so tight it won't spring back. adjusted all the way down and put on according to manual. What ...

Sticky throttle cabel 2007 Yamaha Vstar 650 Classic. When shifting gears, with the clutch engaged and the throttle handle closed, rpm does not decrease accordingly resulting in getting into the next ...

1980 ss 440 injector adjustment I cannot find the adjustment for the throttle cable on the oil injector. I also need a diagram showing where all of the fuel and oil lines lead to. On your throttle ...

1986 Honda ACCORD RUNS GOOD, GOING DOWN THE ROAD 1986 Honda ACCORD RUNS GOOD, GOING DOWN THE ROAD WHEN COMING TO A STOP IT DIES WILL NOT IDLE have you tried to adjust the throttle screw when the ...

i have a 2007 honda rebel and when you throttle it... i have a 2007 honda rebel and when you throttle it boggs down when i let up on the throttle it runs right it has backfired a couple of times and ...

KLX 125 sat for 2 years, carb removed, cleaned, cleaned, cleaned, re-installed no air filter restriction, runs great at 600- approx 2500 rpm then 2/3 throttle to full throttle, bogs. all passages ...

when I close the throttle the engine rpm does'nt slow accordingly(stays fast). I am sure you have checked gable is not kinked, check air cleaner replace if dirty check throttle on carby and crc spray ...

Cleaned carbs on 1989 Radian 600, now idles at 6-8K RPM. Please help. We just cleaned the carbs and when the bike started, it idles to high.. between 6,000 and 8,000 RPM's. Please check the following:

Yfz 450 cuts out I have a '05Yfz 450 that's giving me trouble. My timing chain was old and stretched, So i bought a new one and installed it. The timing is right. (TDC and the dots on the cam's is on ...

How to adjust idle speed on kawasaki td40 brushcutter ? Most idle speeds on brushcutters/ trimmers are controlled by a small screw that touches the plate the cable pulls. Screwing it in holds the ...