Question about Harley Davidson XL 1200 C Sportster Custom Motorcycles
...box cover is not that difficult. Simply take the bolts out and lift the cover off, replace the gasket, put the cover back on with the bolts loose and line them up correctly. Then tighten the bolts to ...
Question about Harley Davidson XL 1200 C Sportster Custom Motorcycles
...rocker box covers. Take the bolts out of the rocker box covers and look at the corner nearest the carb on the center piece. You'll see an "umbrella seal" in this corner. Simply pull it out and pull a ...
Question about Harley Davidson XL 1200 C Sportster Custom Motorcycles
...XL 1200 C rear rocker box is leaking with new gaskets It's possible one of the gaskets got pinched, or one of the cover pieces is warped. Either way, it's gonna have to come apart again to fix
Question about Harley Davidson XL 1200 C Sportster Custom Motorcycles
2001 h-d sportster 1200 custom--torque specs for rear cyl rocker box assy 5/16" bolt - 15-18 foot pounds 1/4" bolts - 10-13 foot pounds Upper rocker cover bolts - 10-13 foot pounds.
Question about Harley Davidson XL 1200 C Sportster Custom Motorcycles
...rocker box on my 2000 harley 1200 sportster custom i have pulled top and middle covers but the valve springs look fine and pushrods seem fine an thoughts? I could be the bushings in the rocker arms ...
Question about Harley Davidson XL 1200 C Sportster Custom Motorcycles
...box cover on and replacing the "umbrellas" and gaskets. Some riders choose to reroute the crankcase breathers underneath the engine by installing aftermarket breather systems on their bike. If you ...
Question about Harley Davidson XL 1200 C Sportster Custom Motorcycles
box lower plate that has the rocker arms in it or the cover that goes over it. Usually it's the cover. Look here for a drawing of that area. sportster-1200-custom-xl1200c/o/m18599#sch622773">http:/
Question about Harley Davidson XL 1200 C Sportster Custom Motorcycles
...pushrods, if not then you will have to remove the rocker boxes first. if you dont release all the pressure from the pushrods you will crack the engine case when you go to remove the cam
604 questions posted
Usually answered in minutes!
351 Questions
242 Questions
159 Questions
145 Questions
121 Questions