1984 Suzuki GSX 750 EF "hold change rear light" Questions

change the rear signal light there are three bolts on the underside of the rear fender which when removed give access to the rear cluster. slightly lift and twist the cluster. this gives access to the

...change it right side of bike, bottom of frame near the rear cylinder exhaust pipe you will see a switch with 2 wires attached to it. Takes to wrenches to take off. one to hold the bracket and on one ...

...change a taillamp bulb First, remove the two bolts (one on either side) which hold on the seat, then the rear of the tail light assembly should be visible. The wires for the tail light should be ...

...hold hand on it comfortably after a long ride . Is this normal? Only had the bike 3 weeks. Salvage title rear end collision. Had to change wheel bearings . On long high speed drives the final drive ...

...light to show the brake. when you depress the brake pedal, or squeeze the brake handle, you normally hear a click of the switch. if both switches are good, it's the wire. the wire may have pinched ...

...change the setting of the timing, remove the cover from the timer cavity on the right side of the engine. Loosen the hold downs on the timing sensor plate and rotate the plate slightly. Rotating it ...

...change spark plug and coil .brought second hand ignition module but still doing the same Check the fuel flow through your petcock. In 1996, Harley went to a vacuum operated fuel petcock. Vacuum from ...

...change the whole assembly? Broke the right rear stem between the bike and the light, ordered the whole thing the stem goes through the body - and has a nut on the other end. You need to find the two ...

...rear brake squeaks after you drive the bike for about 30 minutes and only when you slow way down coming to a stop. I have had the pads changed at my dealer. I think it needs a new rotor. Most of the ...