1987 kawasaki GPZ 500 S - GPX 500 R "front" Questions

My front brake calipers are stuck to the disc, how I have a 1991, GPZ 500 and the front brake calipers are stuck to the disc, how do I take it off and replace? you need to bleed out he break fluid in ...

i have just lowered the back on my gpz 305 dont know how to lower the front im only 5ft the front shocks will have to be taken into a hydraulic centre and the spring will have to be cut to suite your ...

...and can't be pushed. what causes this and how can i fix it? Sound like your brake caliper for the front (I'm assuming that it's the front) is hanging up. They get corrosion and the caliper piston ...

how do I get the old brake pads off the front of my kawasaki gpz500 Its a floating calliper. unbolt it. get a manual it's always a good idea if you don't know your way around the bike.

how do you lower front forks on a gpz 305 kawasaki please losen the triple tree clamps which hold the forks and slide the fork tubes up and retighten

...has a manual it would be awesome thanks download a manual using utorrent. Vacuum pipe from carb to front or underside of fuel valve, fuel rail connects to back side of fuel

...or traveling at low speeds in 3rd gear. I have removed the belt drive cover and observed that the front drive pulley closes half way before the clutch on the rear pulley starts to engage. I have no ...

NNeed torque specs for 2010 harley ultara classic, front axle nut, front brake calipers, axle nut holder What are the torque specs for a 2010 flhtcu, front brake calipers, front axle nut, and front ...

2013 ultra classic torque spec's on Rotors front Axle's front and rear 2013 ultra classic torque spec's on Rotors front Axle's front and rear Front axle nut torque 70-75ft lbs,

front forks on a 1987 Honda Goldwing motorcycle how to change them Place bike on center stand. Jack the front of the bike to raise the front wheel off the ground. Be careful!!! Remove the front wheel.